Computational Fluid–Structure Interaction Study of a New Wave Membrane Blood Pump

Abstract

Purpose-Wave membrane blood pumps (WMBP) are novel pump designs in which blood is propelled by means of wave propagation by an undulating membrane. In this paper, we computationally studied the performance of a new WMBP design (J-shaped) for different working conditions, in view of potential applications in human patients. Methods-Fluid-structure interaction (FSI) simulations were conducted in 3D pump geometries and numerically discretized by means of the extended finite element method (XFEM). A contact model was introduced to capture membrane-wall collisions in the pump head. Mean flow rate and membrane envelope were determined to evaluate hydraulic performance. A preliminary hemocompatibility analysis was performed via calculation of fluid shear stress. Results-Numerical results, validated against in vitro experimental data, showed that the hydraulic output increases when either the frequency or the amplitude of membrane oscillations were higher, with limited increase in the fluid stresses, suggesting good hemocompatibility properties. Also, we showed better performance in terms of hydraulic power with respect to a previous design of the pump. We finally studied an operating point which achieves physiologic flow rate target at diastolic head pressure of 80 mmHg. Conclusion-A new design of WMBP was computationally studied. The proposed FSI model with contact was employed to predict the new pump hydraulic performance and it could help to properly select an operating point for the upcoming first-in-human trials.

Linking Hydraulic Properties to Hemolytic Performance of Rotodynamic Blood Pumps

“…[7,8] The intricate, traumatic effects of the nonphysiologic flow conditions that are prevalent in RBPs yet remain poorly understood and challenging to model, [9] and has meanwhile even called to action both research and industry to start exploring alternative pumping principles including wave membrane blood pump technologies. [10,11] Designed based on the theory of turbomachinery, RBPs convert mechanical input energy into hydraulic output in the form of pressure and volume flow generation. [12] The extent of energy that is not converted into useful hydraulic work is thereby collectively referred to as hydraulic losses.…”

“…[ 7,8 ] The intricate, traumatic effects of the non‐physiologic flow conditions that are prevalent in RBPs yet remain poorly understood and challenging to model, [ 9 ] and has meanwhile even called to action both research and industry to start exploring alternative pumping principles including wave membrane blood pump technologies. [ 10,11 ]…”

The Evolution and Complications of Long-Term Mechanical Circulatory Support Devices

“…Alternately, impeller blades could be removed entirely, as exemplified by CorWave's bladeless LVAD. This device employs a wave membrane to induce blood flow with low fluid shear stress and reduced blood damage [96]. The CorWave LVAD operates using an average flow rate of 6 L/min, a gentle speed of 1.5 m/sec and an oscillation cycle of 25 ms.…”

Design of artificial vascular devices: Hemodynamic evaluation of shear-induced thrombogenicity

“…Wave membranes blood pump are novel approaches for pulsatile flow integration in which blood is moved by wave propagation systems. Both frequency and amplitude of the waves can be monitored to mimic physiological flow (Martinolli et al, 2022). Bileaflet valves are typically subjected to high flow rates and relative changes in volume throughout the cardiac cycle.…”