Computational Fluid Dynamics Study of Magnus Force on an Axis-Symmetric, Disk-Type AUV with Symmetric Propulsion

Abstract

In this paper, the Magnus force induced by a disk-type, spinnable autonomous underwater vehicle (AUV), i.e., autonomous underwater helicopter (AUH), was predicted to promote the spinning AUH moving away from a deep-sea region with temporary and shockable ocean current. The simulation technique of the ANSYS-CFX solver based on viscous computational fluid dynamics (CFD) was employed to analyze the hydrodynamic performance of the spinning AUH and its high-speed propellers in uniform flow conditions. The behavior of the spinning AUH in currents can obviously alter the pressure distribution on both sides of the disk-shaped hull form, resulting in a differential pressure force in the horizontal plane, i.e., Magnus force. The simulation results show that this induced force can enable an AUH at 1 knot service speed to successfully move away from a sudden, transient, and/or steady, uniform ocean current region with inflow velocities of 1–2 knots in deep-sea conditions. The Magnus force induced by symmetrically configurated propeller couple force can be more efficient and effective at driving the AUH’s escape from the current spoiler zone than driving the AUH using the two high-revolution propellers directly. A suitable mechanical power energy-saving matching point integrating the AUH and symmetric propulsion was determined to compare the proposed method and two conventional methods for AUH escape from currents. The comparison results prove that the proposed method is effective and efficient. This study provides a significant reference for the interdependent relationship between the effective spinning speed of an AUH, subject to couple force, controlled propeller revolution, AUH speed, and battery capacity, and the range of ocean currents.

Solid Particle Erosion Area of Rotor Blades: Application on Small-Size Unmanned Helicopters

“…Computational fluid dynamics (CFD) is an important basis for erosion research, and many results on erosion are based on CFD. Chen [5,6] used CFD software to analyze the gas-liquid two-phase flow of an underwater hovering device, and the fluid structure change law was found after the hovering device entered the water. Haider et al [7] and Wang et al [8] used CFD and finite element to track the particles after erosion, and obtained the wall rebound model of the particles in complex geometric shapes, which would be helpful for future erosion research.…”

Simulation of nano elastic polymer chain displacement under pressure gradient/electroosmotic flow with the target of less dispersion of transition

“…As second challenge mentioned, complex behavior from collision of particles are formed and will affect on polymer motion in nano channel. Numerical simulation is a promising tool for understanding the complex behavior of polymer chains 29 . Clearly, the particle methods for simulation are able to show more details.…”

Investigation of Magneto Hydro-Dynamics Effects on a Polymer Chain Transfer in Micro-Channel Using Dissipative Particle Dynamics Method

“…Such simulation methods have been successfully applied to different nano-scale flow problems. Researches have used different numerical simulation methods such as computational fluid dynamics [5][6][7], molecular dynamics [8], Langevin dynamics [9,10], and Brownian dynamics [11] to study prediction of polymer chains behavior in fluid flows. Based on the Lagrangian methods such as Molecular Dynamics [12][13][14][15], lattice Boltzmann method [16,17] or smoothed particle hydrodynamics method [18][19][20][21], the dissipative particle dynamics (DPD) method is a mesoscopic method [12,13,22] which has been vastly used in micro/nano-scale simulations.…”