Comparison of the Adsorption Ability of MgAl-HC, CaAl-HC, and ZaAl-HC Composite Materials Based on Duku Peel Hydrochar in Adsorption of Direct Green Anionic Dyes

Abstract

Preparation of composite material from layered double hydroxide (LDH) with hydrochar (HC) from duku peel produces CaAl-HC, MgAl-HC, and ZnAl-HC have shown the success of the preparation process as evidenced by characterizations such as XRD and FT-IR. The XRD characterization data evidenced the typical diffraction of the hydrochar around 2θ = 20° in the composite material. FTIR analysis is a characterization that supports the success of composite materials, which showed the presence of typical vibrations of HC at 3245, 2931, and 1635 cm–1 contained in the composite spectrum. The application of MgAl-HC, CaAl-HC, and ZnAl-HC composites as adsorbents showed Qmax (adsorption ability) values of 94.340 mg/g, 128.205 mg/g, and 89.286 mg/g. Overall the adsorption process is endothermic with a positive enthalpy value, and a negative Gibbs free energy value indicates a spontaneous adsorption process. The isotherm model of MgAl-HC, CaAl-HC, and ZnAl-HC show that the Langmuir isotherm model is more dominant, as indicated by the R2 value closer to 1 which indicates that the adsorption process takes place in a monolayer.

Layered Double Hydroxide Zn/M3+ (M3+= Al and Cr) as Highly Efficient Adsorbent of Heavy Metal Pb(II)

“…Zn-Al LDH was synthesised at pH 10 by the coprecipitation method (Juleanti et al, 2022). A 10 mL solution of 0.75 M Zn(NO 3 ) 2 .…”

Modification of Mg/Al-LDH Intercalated Metal Oxide (Mg/Al-Ni) to Improve The Performance of Methyl Orange and Methyl Red Dyes Adsorption Process

“…2 shows that adsorption kinetics followed PSO through the linear regression coe cient (R 2 ) value, close to the value 1. The kinetic model of PSO shows that the process occurs in uenced by adsorbents and adsorbate, while the PFO is a ected by one of the components between the adsorbent or adsorbate (Juleanti et al, 2022) . Data in Figures 6 and 7 indicates that increasing temperature causes the concentration adsorption of MO and MR to 3 shows an increase in adsorption capacity of Mg/Al-LDH is 69.930 mg/g to 71.429 mg/g for MO and 77.519 mg/g to 98.039 mg/g for MR. Based on Table 3, the Langmuir model is better than the Freundlich model on the adsorption process in this study, with the value of R 2 closer to the value of 1.…”

Green Synthesis of Nickel Aluminum Layered Double Hydroxide using Chitosan as Template for Adsorption of Phenol

“…The development of LDH composites was also carried out on a hydrochar basis. Research by Juleanti et al (2022) compared the adsorption ability of Mg/Al, Ca/Al, and Zn/Al composites based on hydrochar on the absorption of direct green dyes. The ability of these hydrochar-based composites to have adsorption capacities of 94.34 mg/g on Mg/Alhydrochar, 128.20 mg/g on Ca/Al-hydrochar, and 89.29 mg/g on Zn/Al-hydrochar.…”