Comparison of a Novel Polymeric Hollow Fiber Heat Exchanger and a Commercially Available Metal Automotive Radiator

Abstract

A novel heat exchanger for automotive applications developed by the Heat Transfer and Fluid Flow Laboratory at the Brno University of Technology, Czech Republic, is compared with a conventional commercially available metal radiator. The heat transfer surface of this heat exchanger is composed of polymeric hollow fibers made from polyamide 612 by DuPont (Zytel LC6159). The cross-section of the polymeric radiator is identical to the aluminum radiator (louvered fins on flat tubes) in a Skoda Octavia and measures 720 × 480 mm. The goal of the study is to compare the functionality and performance parameters of both radiators based on the results of tests in a calibrated air wind tunnel. During testing, both heat exchangers were tested in conventional conditions used for car radiators with different air flow and coolant (50% ethylene glycol) rates. The polymeric hollow fiber heat exchanger demonstrated about 20% higher thermal performance for the same air flow. The efficiency of the polymeric radiator was in the range 80–93% and the efficiency of the aluminum radiator was in the range 64–84%. The polymeric radiator is 30% lighter than its conventional metal competitor. Both tested radiators had very similar pressure loss on the liquid side, but the polymeric radiator featured higher air pressure loss.

Material Extrusion of Helical Shape Memory Polymer Artificial Muscles for Human Space Exploration Apparatus

“…The Brinkman number is a dimensionless number used to analyze the ratio of viscous heating to conduction heating and is commonly used in describing polymer melt processes [ 37 , 38 ]. The Nusselt number is the dimensionless ratio of convective to conductive heat transfer across a boundary [ 39 , 40 ]. In this study, the Brinkman number describes the influence of the heat transfer caused by pressure-driven polymer melt flow and the printhead temperature.…”

Polymeric Hollow Fiber Heat Exchangers for Automotive Applications

“…This chapter will describe laboratory prototype of a polymeric hollow fiber comparison with a commercially available aluminum radiator [7]. In the Heat Transfer and Fluid Flow Laboratory, a novel type of polymeric heat exchanger has been developed and built for automotive use.…”

Polymeric Hollow Fiber Heat Exchangers in Higher Temperatures

“…That study also mentions the significant influence of the diameter of the polymeric hollow fibre on heat transfer coefficients on both inner and outer surfaces of the fibre. The recent study [8] compare the commercially available aluminium automotive radiator with the PHFHE of the same measurements, so the direct change is possible. The tested PHFHE was 30% lighter than the metal one.…”