Comparative Analysis of the Energy Consumption of Different Wastewater Treatment Plants

Abstract

Abstract:Wastewater treatment is a process of intensive use of resources, mainly energy, which accounts for 15 to 40% of the operating costs in conventional wastewater treatment systems. With the expected demographic increase and the restrictive trend in quality standards for effluent discharge, the energy consumption tends to increase further if there are no changes in the processes. The literature gathers the energy consumption of different wastewater treatment systems, in an attempt to map the processes and to help the decision making in the search for better alternatives. One of these alternatives is the recovery of energy from the sewer. The conventional treatment system requires between 0.3 and 0.6 kWh/m 3 , while the energy contained in the wastewater may be up to 10 times of the one required for the treatment. The simultaneous wastewater treatment and power generation, called the hybrid treatment system, is a worldwide trend. In Brazil, recent studies have shown, through energy balances, the energy viability of anaerobic-aerobic systems, with the production of algae. This work presents a comparative review of the energy consumption of different wastewater treatment plants, aiming at a better understanding and management of the processes. The results showed that there are few Brazilian data published, indicating that the country still demands more studies on the subject to improve its processes. In the treatment of wastewater, most studies point to the aerobic process as the largest consumer of energy, and efforts are focused on the optimization of the conventional system, but still without great achievements. Environmental goals and water supply strategies are poorly integrated with the energy handling, leading to an inefficient use, and with economic and environmental consequences.

Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect

“…However, the aeration system is the most energy-consuming part of process, which consumes 0.18 to 0.80 kW·h/m 3 , accounting for approximately 50.0–60.0% of the energy expenditure of wastewater treatment plants (Figure ). , Moreover, the aeration process produces excess waste gas, the disturbed water body produces a large amount of water wave energy, and the noise of the blower room produces vibrational energy. If these potential energies can be effectively used to improve the efficiency of wastewater treatment, the energy consumption of secondary treatments will be mitigated.…”

Saving Energy in Biological Wastewater Treatment by Using Extremely Low-Frequency Electric Field—Pilot-Scale Study

“…All these treatment stages involve significant energy consumption, primarily determined by the pollutant content of the water, the processing temperature, and the purification technology [20,[41][42][43][44] that is implemented. The values reported in the literature range from 2.8 kWh/m 3 [45] for wastewater treatment plants up to 1000 m 3 /day, to 0.240 kWh/m 3 in large wastewater treatment plants, that are usually equipped with digesters for biogas production [46,47].…”

Bibliometric analysis of artificial intelligence algorithms used for microbial fuel cell research

“…To solve this, wastewater treatment technologies have been developed with lower operating costs or the ability to obtain subproducts from wastewater that can generate a profit. Some of these are designed to harness the chemical energy contained in wastewater, as it can be between 6 and 13 times greater than that required for conventional wastewater treatment (Barroso-Soares et al 2017;Beegle & Borole 2018).…”