Comparative Analysis and Energy-Efficient Write Scheme of Ferroelectric FET-Based Memory Cells

Abstract

The ferroelectric field-effect transistor (FeFET) is one of the most promising candidates for emerging nonvolatile memory devices owing to its low write energy and high ION/IOFF ratio. For FeFET applications as nonvolatile memory devices, 1FeFET, 1T-1FeFET, 2T-1FeFET, and 3T-1FeFET cells have been proposed. The 1FeFET cell exhibits the highest density but suffers from write disturbance. Although the 1T-1FeFET and 2T-1FeFET cells resolve the write disturbance, they use a write scheme with a negative write voltage (VW), which requires voltage swings of many control signals, leading to a significantly high write energy consumption. The 3T-1FeFET cell uses a write scheme without a negative VW; however, it exhibits the largest area overhead. Although the 1T-1FeFET cell resolves the write disturbance with a small area overhead; however, it exhibits high write energy consumption because of the use of a negative VW. In this paper, to significantly reduce the write energy consumption, we propose a less control signal swing (LCSS) write scheme without using a negative VW. Simulation results indicate that the worst, average, and best cases of the proposed LCSS write scheme can achieve 35%, 66%, and 96% lower write energy consumption, respectively, than the write scheme with a negative VW in the 1T-1FeFET cell. We also identify the available sensing schemes for each FeFET cell in the read operation according to the FeFET threshold voltage distribution.