Combining Fisher Criterion and Deep Learning for Patterned Fabric Defect Inspection

Rolling bearings are the vital components of large electromechanical equipment, thus it is of great significance to develop intelligent fault diagnoses for them to improve equipment operation reliability. In this paper, a fault diagnosis method based on refined composite multiscale reverse dispersion entropy (RCMRDE) and random forest is developed. Firstly, rolling bearing vibration signals are adaptively decomposed by variational mode decomposition (VMD), and then the RCMRDE values of 25 scales are calculated for original signal and each decomposed component as the initial feature set. Secondly, based on the joint mutual information maximization (JMIM) algorithm, the top 15 sensitive features are selected as a new feature set and feed into random forest model to identify bearing health status. Finally, to verify the effectiveness and superiority of the presented method, actual data acquisition and analysis are performed on the bearing fault diagnosis experimental platform. These results indicate that the presented method can precisely diagnose bearing fault types and damage degree, and the average identification accuracy rate is 97.33%. Compared with the refine composite multiscale dispersion entropy (RCMDE) and multiscale dispersion entropy (MDE), the fault diagnosis accuracy is improved by 2.67% and 8.67%, respectively. Furthermore, compared with the RCMRDE method without VMD decomposition, the fault diagnosis accuracy is improved by 3.67%. Research results prove that a better feature extraction technique is proposed, which can effectively overcome the deficiency of existing entropy and significantly enhance the ability of fault identification.

Section: Diagnosis Results and Analysismentioning

confidence: 99%

“…To further evaluate the presented method, some machine learning algorithms, such as KNN, BPNN, and SVM, were selected for comparison. In total, the proposed method Subsequently, the JMIM is compared with Fisher [48] and LS [49]. Figure 14 illustrates the diagnostic accuracy of the 3 methods.…”

Section: Comparison With Other Methodsmentioning

confidence: 99%

Intelligent Diagnosis of Rolling Element Bearing Based on Refined Composite Multiscale Reverse Dispersion Entropy and Random Forest

Liu

Yang²,

et al. 2022

“…Since Hinton [ 35 , 36 ] proposed a greedy layer-wise pre-training algorithm to initialize the weights of deep architectures, artificial neural networks have been revived. Deep neural networks have become a new popular topic and advanced in image classification, object tracking [ 37 ] and recognition [ 38 ], gesture recognition [ 39 ], action recognition [ 40 ], defect inspection [ 41 , 42 , 43 , 44 ], voice recognition, natural language understanding, etc. Popular deep learning frameworks include stacked autoencoders, convolutional neural networks, and restricted Boltzmann machine.…”

Section: Proposed Methodsmentioning

confidence: 99%

Pixel-Wise Crack Detection Using Deep Local Pattern Predictor for Robot Application

Wang

2018

Self Cite

Robotic vision-based crack detection in concrete bridges is an essential task to preserve these assets and their safety. The conventional human visual inspection method is time consuming and cost inefficient. In this paper, we propose a robust algorithm to detect cracks in a pixel-wise manner from real concrete surface images. In practice, crack detection remains challenging in the following aspects: (1) detection performance is disturbed by noises and clutters of environment; and (2) the requirement of high pixel-wise accuracy is difficult to obtain. To address these limitations, three steps are considered in the proposed scheme. First, a local pattern predictor (LPP) is constructed using convolutional neural networks (CNN), which can extract discriminative features of images. Second, each pixel is efficiently classified into crack categories or non-crack categories by LPP, using as context a patch centered on the pixel. Lastly, the output of CNN—i.e., confidence map—is post-processed to obtain the crack areas. We evaluate the proposed algorithm on samples captured from several concrete bridges. The experimental results demonstrate the good performance of the proposed method.

“…Learning-based approaches, especially methods with deep neural network architectures, are very promising for defect inspection. In recent years, there have been many studies that have investigated this field and explored better strategies for defect inspection [ 20 , 21 , 22 , 23 ]. However, the majority of these studies use supervised learning, which often requires large amounts of labeled defective samples for model training [ 23 ].…”

Section: Related Work and Foundationsmentioning

confidence: 99%

Automatic Fabric Defect Detection with a Multi-Scale Convolutional Denoising Autoencoder Network Model

Mei

Wang

Wen

2018

231

121

Fabric defect detection is a necessary and essential step of quality control in the textile manufacturing industry. Traditional fabric inspections are usually performed by manual visual methods, which are low in efficiency and poor in precision for long-term industrial applications. In this paper, we propose an unsupervised learning-based automated approach to detect and localize fabric defects without any manual intervention. This approach is used to reconstruct image patches with a convolutional denoising autoencoder network at multiple Gaussian pyramid levels and to synthesize detection results from the corresponding resolution channels. The reconstruction residual of each image patch is used as the indicator for direct pixel-wise prediction. By segmenting and synthesizing the reconstruction residual map at each resolution level, the final inspection result can be generated. This newly developed method has several prominent advantages for fabric defect detection. First, it can be trained with only a small amount of defect-free samples. This is especially important for situations in which collecting large amounts of defective samples is difficult and impracticable. Second, owing to the multi-modal integration strategy, it is relatively more robust and accurate compared to general inspection methods (the results at each resolution level can be viewed as a modality). Third, according to our results, it can address multiple types of textile fabrics, from simple to more complex. Experimental results demonstrate that the proposed model is robust and yields good overall performance with high precision and acceptable recall rates.