Characterising precipitate evolution in multi-component cast aluminium alloys using small-angle X-ray scattering

Abstract

The version presented here may differ from the published version or from the version of record. If you wish to cite this item you are advised to consult the publisher's version. Please see the repository url above for details on accessing the published version and note that access may require a subscription. AbstractAluminium alloys can be strengthened significantly by nano-scale precipitates that restrict dislocation movement. In this study, the evolution of inhomogenously distributed trialuminide precipitates in two multi-component alloys was characterised by synchrotron small-angle Xray scattering (SAXS). The appropriate selection of reference sample and data treatment required to successfully characterise a low volume fraction of precipitates in multi-component alloys via SAXS was investigated. The resulting SAXS study allowed the analysis of statistically significant numbers of precipitates (billions) as compared to electron microscopy (hundreds). Two cast aluminium alloys with different volume fractions of Al3ZrxV1-x precipitates were studied. Data analysis was conducted using direct evaluation methods on SAXS spectra and the results compared with those from transmission electron microscopy (TEM). Precipitates were found to attain a spherical structure with homogeneous chemical composition. Precipitate evolution was quantified, including size, size distribution, volume fraction and number density. The results provide evidence that these multi-component alloys have a short nucleation stage, with coarsening dominating precipitate size. The coarsening rate constant was calculated and compared to similar precipitate behaviour.2

Looking into Limoncello: The Structure of the Italian Liquor Revealed by Small-Angle Neutron Scattering

“…All curves look qualitatively very similar, with the main feature being an extended q –4 power-law, typical for two-domain systems with a sharp interface. Typical examples are emulsions, marble, alloys presenting precipitate formation, or foams. ,− The observed scattering arises from the variation of the atomic composition at the interface between the domains and the suspending medium. Performing a Porod analysis allows us to determine the specific amount of interface Σ present in the system where Δρ is the scattering length difference between the domains and the medium.…”

Revealing Nanoscale Domains in Cu2ZnSnS4 Thin Films by Catalyzed Chemical Etching

“…Typically, the size distribution of precipitates in an alloy matrix can be well fitted by a lognormal curve. [ 18 ] Our group has previously reported that ZnS precipitation in CZTS films with a Cu‐poor and Zn‐rich composition mostly exists close to the film's top surface. [ 19,20 ] It is highly possible that these spheres at nanometer scale are ZnS precipitates.…”

Intermetallics Formation and Their Effect on Mechanical Properties of Al-Si-X Alloys

“…The mean aluminium consumption in automobiles in Europe is shown in Figure 1. The increasing demand and studies on these alloys seem to be proportionate, as several studies have been reported on Al-Si-X alloys' microstructure, mechanical properties and their modifications [5][6][7][8][9][10][11]. The high demand is due to the excellent high strength-to-weight ratio, abrasion and corrosion resistance and low coefficient of thermal expansion possess by aluminium alloys.…”