Changes in the Structure and Corrosion Protection Ability of Porous Anodic Oxide Films on Pure Al and Al Alloys by Pore Sealing Treatment

Abstract

It is well known that corrosion protection of pure Al is enormously improved by the formation of porous anodic oxide films and by pore sealing treatment. However, the effects of anodizing and pore sealing on corrosion protection for Al alloys are unclear, because the alloying elements included in Al alloys affect the structure of anodic oxide films. In the present study, porous anodic oxide films are formed on pure Al, 1050-, 3003- and 5052-Al alloys, and pore sealing was carried out in boiling water. Changes in the structure and corrosion protection ability of porous anodic oxide films on pure Al and the Al alloys by pore sealing, were examined by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). SEM observation showed that anodic oxide films formed on pure Al have a smooth surface after pore sealing, and that cracks are formed in anodic oxide films on 1050-, 3003- and 5052-aluminum alloys, after pore sealing. Corrosion protection after pore sealing increased with anodizing time on pure Al, but only slightly increased with anodizing time on the Al alloys.

Self-Healing Coatings Consisting of an Outer Electrodeposited Epoxy Resin Layer and an Inner Porous Anodic Oxide Layer with Healing Agents for the Corrosion Protection of Al Alloys

“…The corrosion protection abilities of Al alloys are too low for them to be used as industrial products for long-term applications because the corrosion of Al alloy products causes the deterioration of their performances and safeties. Therefore, surface treatments, including anodizing, chemical treatments, organic coating, metal plating, and thermal spraying, are applied to improve the corrosion protection of Al alloy products [7][8][9][10].…”