Chain-network anatase/TiO 2 (B) thin film with improved photocatalytic efficiency

Ong

et al. 2015

Sci Rep

Hierarchical heterostructures of beta-iron oxyhydroxide (β-FeOOH) nanostructures on electrospun TiO2 nanofibers were synthesized by a facile hydrothermal method. This synthesis method proves to be versatile to tailoring of β-FeOOH structural design that cuts across zero-dimensional particles (TF-P), one-dimensional needles (TF-N) to two-dimensional flakes (TF-F). In addition, synthesizing such oxyhyroxide nanostructures presents the advantage of exhibiting similar functional performances to its oxides counterpart however, without the need to undergo any annealing step which leads to undesirable structural collapse or sintering. The as-prepared hierarchical heterostructures possess high surface area for dye adsorptivity, efficient charge separation and visible photocatalytic activity. Also, for the first time, hydrogen gas sensing has been demonstrated on β-FeOOH nanostructures at room temperature. The reported hierarchical heterostructures of β-FeOOH on TiO2 nanofibers afford multiple functions of photocatalysis and sensing which are highly promising for environment monitoring and clean up applications.

Section: Resultsmentioning

confidence: 99%

TiO2 Fibers Supported β-FeOOH Nanostructures as Efficient Visible Light Photocatalyst and Room Temperature Sensor

Ong

et al. 2015

Sci Rep

ACS Sustainable Chem. Eng.

“…The intensity of photoluminescence emission is dependent on effectiveness of the electron–hole recombination process. The greater the photoluminescence emission, the more efficient the recombination process, which indicates lower activity for photocatalysis . Photoluminescence emissions of original and Au/Pd/Pt core–shell nanoparticle-modified TiO 2 and NaTaO 3 materials were examined (Figure ).…”

Section: Resultsmentioning

confidence: 99%

“…The greater the photoluminescence emission, the more efficient the recombination process, which indicates lower activity for photocatalysis. 63 Photoluminescence emissions of original and Au/ Pd/Pt core−shell nanoparticle-modified TiO 2 and NaTaO 3 materials were examined (Figure 5). All of the samples were excited by light of 330 nm wavelength.…”

Section: ■ Results and Discussionmentioning

confidence: 99%

TiO₂ and NaTaO₃ Decorated by Trimetallic Au/Pd/Pt Core–Shell Nanoparticles as Efficient Photocatalysts: Experimental and Computational Studies

Malankowska

Kobylański

Mikołajczyk

et al. 2018

Novel triple-layered trimetallic Au/Pd/Pt nanoparticles (NPs) with a porous Pt shell, showing a hedgehog-like structure, were successfully bounded with TiO2 and NaTaO3 surfaces, and used for photocatalytic purpose. To characterize all as-prepared samples, XRD, TEM, EDX, SEM, ISP-OES, DRS, XPS, and photoluminescence (PL) emission spectroscopy were applied. It was found that 25 nm Au/Pd/Pt core–shell NPs were formed, and good interaction between the porous Pt outer shells and the semiconductor surface was obtained. To appraise the effect of the semiconductor’s matrix type and the amount of used AuPdPt NPs on the photocatalytic performance, three types of reactions were employed: (i) degradation of phenol (under mono- and polychromatic irradiation), (ii) the efficiency of toluene removal in gas phase under visible light, and (iii) yield of H2 generation under UV–vis irradiation. Our results proved that the decoration of both TiO2 and NaTaO3 by AuPdPt NPs caused not only an increase in degradation yield of contaminants in the aqueous and gas phases but also significant enhancement in hydrogen generation. Amount of formed hydrogen was raised from 2.19 to 213.8 μmol/min for pristine rutile and rutile decorated by trimetallic NPs, respectively. In addition, the adsorption energy of water and oxygen molecules on modified TiO2_rutile and TiO2_anatase surface were investigated by the density functional (DFT) calculations. Data obtained by theoretical computation was found to be complementary to experimental results. In summary, the ternary metallic core–shell Au/Pd/Pt nanoparticles were successfully applied for TiO2 and NaTaO3 modification and resulted in providing new promising materials for the environmental purification and for production of alternative energy sources when irradiated under visible and UV–vis light.

“…It is essential to study the photoluminescence (PL) emission spectra of semiconductor photocatalysis, which can provide information regarding electron-hole recombination processes. The PL signal is obtained from emitted photons by electron-hole pair recombination in a photocatalysis [39].The higher PL emission signal the more efficient the recombination process, and the lower the activity for photocatalysis [40]. Figure 4 displays PL emission spectra of prepared photocatalysts at an excitation wavelength of 330 nm.…”

Section: Photoluminescence Propertiesmentioning

confidence: 99%

The Effect of AgInS2, SnS, CuS2, Bi2S3 Quantum Dots on the Surface Properties and Photocatalytic Activity of QDs-Sensitized TiO2 Composite

et al. 2020

The effect of type (AgInS 2 , SnS, CuS 2 , Bi 2 S 3 ) and amount (5, 10, 15 wt%) of quantum dots (QDs) on the surface properties and photocatalytic activity of QDs-sensitized TiO 2 composite, was investigated. AgInS 2 , SnS, CuS 2 , Bi 2 S 3 QDs were obtained by hot-injection, sonochemical, microwave, and hot-injection method, respectively. To characterize of as-prepared samples high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-Vis spectroscopy and photoluminescence (PL) emission spectroscopy were applied. The size of AgInS 2 , SnS, CuS 2 , Bi 2 S 3 QDs were 12; 2-6; 2-3, and 1-2 nm, respectively. The QDs and QDs-sensitized TiO 2 composites obtained have been tested in toluene degradation under LEDs light irradiation (λ max = 415 nm and λ max = 375 nm). For pristine QDs the efficiency of toluene degradation increased in the order of AgInS 2 < Bi 2 S 3 < CuS < SnS under 375 nm and AgInS 2 < CuS < Bi 2 S 3 < SnS under 415 nm. In the presence of TiO 2 /SnS QDs_15% composite, 91% of toluene was degraded after 1 h of irradiation, and this efficiency was about 12 higher than that for pristine QDs under 375 nm. Generally, building the TiO 2 /AgInS 2 and TiO 2 /SnS exhibited higher photoactivity under 375 nm than the pristine TiO 2 and QDs which suggests a synergistic effect between QDs and TiO 2 matrix. Catalysts 2020, 10, 403 2 of 18 application of metal sulfides (M x S y ) for wide band semiconductors modification, because of their high charge separation efficiency and narrow band gaps, which possibly enable light harvesting at longer wavelengths [9]. Liu et al. studied the efficiency of AgInS 2 /TiO 2 heterostructures in 1,2-dichlorobenzene (o-DCB) degradation under visible light [10]. They observed that AgInS 2 /TiO 2 composites could expand the visible-light response range and greatly decreased the recombination of photogenerated electron−hole pairs in the composites. The degradation of o-DCB for the most active sample reaches about 50% after 8h of irradiation. Jang et al. prepared Ag-SnS-TiO 2 nanocomposite for methylene blue and rhodamine B degradation under simulated sunlight [11].The photoactivity of the produced photocatalysts was about 2-3 times higher than that of P25. Compared with bare TiO 2 the CuS/TiO 2 [12], CdS/TiO 2 [13-15], SnS/TiO 2 [16], Ag 2 S/TiO 2 [17,18], CuInS 2 /TiO 2 [19-21], Bi 2 S 3 /TiO 2 [22][23][24] nanocomposites present a significant improvement on photocatalytic reactions due to the decreasing recombination of electron-hole pairs and the broadened light absorption spectra. However, the metal sulfides commonly employed for TiO 2 modification have been used in nanoparticle sizes and not in quantum dots sizes. Further, it has been shown that the size of metal sulfides (MS) particles can have an impact on its physicochemical and optical properties. Recently, the literature data demonstrated that the decrease in particle size lowers the recombination of the electron-hole pair within the semiconductor particle. Quantum...