Canonical properties of optical-design modules

Stavroudis, Orestes N.; Mercado, R. I.

doi:10.1364/josa.65.000509

Cited by 6 publications

(3 citation statements)

References 4 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…In contrast to the paraxial method, since the lens module method employed in this study involves lots of physical quantities of the optical system, some of them can be manipulated directly by using lens modules. Several lenses have been designed and evaluated by lens modules (Stavroudis and Merecado, 1975;Kuper and Rimmer, 1988). Choose a suitable structure in references first, optimizes and adjusts until to meet the requirements.…”

Section: Optical Designmentioning

confidence: 99%

Design of High Pixel Mobile Phone Camera Lens

Peng¹

2013

RJASET

View full text Add to dashboard Cite

The compact, slim and high pixel mobile phone camera is highly demanded with the development of mobile phone, especially the thinner and thinner request of people. To satisfy this need, a mobile phone lens system composed of 1 glass spherical lens and 3 plastic aspheric lenses was designed with Code V. The F-number was 2.85 and FOV was 61°, the effective focal length and back focal length are 5 and 0.468 mm, respectively. A 1/3.2 inch 8 mega-pixel CMOS made by APTINA was taken as the image sensor of the lens assembly, whose pixel size is 1.4 µm and the limiting resolution was 357 lp/mm. The design results shown that the M TF value was more than 0.2 within most fields of view at the Nyquist frequency and more than 0.5 at the 1/2 Nyquist frequency, the maximum distortion was 0.66%. It shows that the lens has good performance and meets practical requirements.

show abstract

Section: Optical Designmentioning

confidence: 99%

Design of High Pixel Mobile Phone Camera Lens

Peng¹

2013

RJASET

View full text Add to dashboard Cite

show abstract

“…It is difficult to judge if the solutions satisfy all the requirements for the zoom system [1][2][3][4][5]. Contrary to the paraxial method, since the lens module method employed in this study involves lots of physical quantities of the optical system, the first-order and thirdorder aberrations can be manipulated directly by using lens modules [6][7]. Several zoom lenses have been designed and evaluated by lens modules [8][9][10][11][12].…”

Section: Introductionmentioning

confidence: 99%

Zoom Lens Design for a 10x Slim Camera using Successive Procedures

Park¹,

Lee²

2013

Journal of the Optical Society of Korea

View full text Add to dashboard Cite

This study presents a new design method for a zoom lens, in which real lens groups are designed successively to combine to form a lens modules zoom system. The lens modules and aberrations are applied to the initial design for a four-group inner-focus zoom system. An initial design with a focal length range of 4.2 to 39.9 mm is derived by assigning the first-order quantities and third-order aberrations to each module along with the constraints required for optimum solutions. After obtaining the lens module zoom system, the real lens groups are successively, not separately, designed to get a zoom lens system. Compared to the separately designed real lens groups, this approach can give a better starting zoom lens and save time. The successively designed groups result in a zoom system that satisfies the basic properties of the zoom system consisting of the original lens modules. In order to have a slim system, we directly inserted the right-angle prism in front of the first group. This configuration resulted in a compact zoom system with a depth of 12 mm. The finally designed zoom lens has an f-number of 3.5 to 4.5 and is expected to fulfill the requirements for a mobile zoom camera having high zoom ratio of 10x.

show abstract

“…In contrast to the paraxial method, since the lens module method employed in this study involves lots of physical quantities of the optical system, the first-order and thirdorder aberrations can be manipulated directly by using lens modules. Several lenses have been designed and evaluated by lens modules [4][5].…”

Section: Introductionmentioning

confidence: 99%

Compact Zoom Lens Design for a 5x Mobile Camera Using Prism

Park¹,

Lee²,

Kim³

2009

Journal of the Optical Society of Korea

View full text Add to dashboard Cite

This study presents the compact zoom lens with a zoom ratio of 5x for a mobile camera by using a prism. The lens modules and aberrations are applied to the initial design for a four-group inner-focus zoom system. An initial design with a focal length range of 4.4 to 22.0 mm is derived by assigning the first-order quantities and third-order aberrations to each module along with the constraints required for optimum solutions. We separately designed a real lens for each group and then combined them to establish an actual zoom system. The combination of the separately designed groups results in a system that satisfies the basic properties of the zoom system consisting of the original lens modules. In order to have a slim system, we directly inserted the right-angle prism in front of the first group. This configuration resulted in a more compact zoom system with a depth of 8 mm. The finally designed zoom lens has an f-number of 3.5 to 4.5 and is expected to fulfill the requirements for a slim mobile zoom camera having high zoom ratio of 5x.

show abstract

Canonical properties of optical-design modules

Cited by 6 publications

References 4 publications

Design of High Pixel Mobile Phone Camera Lens

Design of High Pixel Mobile Phone Camera Lens

Zoom Lens Design for a 10x Slim Camera using Successive Procedures

Compact Zoom Lens Design for a 5x Mobile Camera Using Prism

Contact Info

Product

Resources

About