Battery characterization for wireless sensor network applications to investigate the effect of load on surface temperatures

Abstract

Wireless sensor networks (WSN) are commonly used in remote environments for monitoring and sensing. These devices are typically powered by batteries, the performance of which varies depending on environmental (such as temperature and humidity) as well as operational conditions (discharge rate and state-of-charge, SOC). As a result, assessing their technical viability for WSN applications requires performance evaluation based on the aforementioned stimuli. This paper proposes an efficient method for examining battery performance parameters such as capacity, open-circuit voltage (OCV) and SOC. Four battery types (lithium-ion, lithium-polymer, nickel-metal hydride and alkaline) were subjected to IEEE 802.15.4 protocol-based discharge rates to record the discharge characteristics. Furthermore, the combined effect of discharge rates on battery surface temperature and OCV variations was investigated. Shorter relaxation times (4–8 h) were observed in lithium-based batteries, resulting in faster energy recovery while maintaining rated capacity. It was observed that nearly 80% of the voltage region was flat, with minor voltage variations during the discharge cycle. Furthermore, lithium-based batteries experienced negligible changes in surface temperatures (approx. 0.03°C) with respect to discharge rates, making them the best battery choice for low-power applications such as WSNs.

Powering a Low Power Wireless Sensor in a Harsh Industrial Environment: Energy Recovery with a Thermoelectric Generator and Storage on Supercapacitors

“…Replacing the batteries after a certain period may be considered but is not always appropriate. In fact, the cost of exchanging batteries in hundreds of devices, especially if they are in hard-to-reach or hazardous locations, can make the entire network deployment cost-prohibitive [2].…”

SMAC-Based WSN Protocol-Current State of the Art, Challenges, and Future Directions

“…e power unit is the SN's primary energy source, and it is typically powered by batteries such as lithium-ion (Li-ion), lithium-polymer (LiPo), nickel-metal hydride (NiMH), and alkaline [28,29]. e capacities, voltages, advantages, and disadvantages of the various types of batteries (see Table 1) used in energy-e cient WSN applications have gained attention since batteries are the heart of wireless sensor nodes.…”