Abstract-This paper presents a new simulation methodology to study the effect of radiated transient disturbances on digital communication systems. The procedure is divided in two stages. In the first one, FDTD numerical simulation is used to determine the transient levels coupled to the antennas. In the second stage, these levels are analyzed by means of a signal processing simulation software to determine the degradation caused in the system. The procedure is applied to a DAB system in car when a radiated interference is generated by a transient in a vehicle cable. The results show that the amplitude of the radiated transient coupled signal is a key parameter, but it is also essential to take into account other parameters such as burst duration and frequency.