Arduino based gas leakage and temperature monitoring and control system

Abstract

<span lang="EN-US">Gas leakage is a major problem with industrial sectors, residential premises and gas powered vehicles like CNG (Compressed Natural Gas) buses etc. One of the preventive methods to stop accidents associated with the gas leakage is to install a gas leakage detection device at vulnerable places. The aim of this project is to develop such a device that can automatically detect and control gas leakages and also monitor temperature in vulnerable areas. The system detects the leakage of the LPG (Liquefied Petroleum Gas) using a gas sensor and then also monitors the temperature using a temperature sensor. When the LPG concentration in the air exceeds a certain level, the gas sensor senses the gas leakage and the output of the sensor goes LOW, the system then opens the exit windows, and then uses the GSM to alert the person about the gas leakage via SMS. Also, when the temperature of the environment exceeds a certain limit, it then turns ON the LED (indicator) and make an alarm through the buzzer. An LCD (16x2) displays the current temperature and gas leakage status in degree Celsius and PPM respectively.</span>

A survey on predicting oil spills by studying its causes using deep learning techniques

“…It is also necessary to acknowledge the quantity of gas obtainable by weight of the cylinder and due to time of alteration of different tube. In [27] an replacement methodology has existing to evolving a device that can automatically discover and tracking gas spills and also observe the heat and evidenced that this machine meaningfully rising of the possibilities and effectiveness of rejecting gas spilling.…”