Application of Sustainable and Low-Cost Sludge-Based Adsorbents for Textile Dye Degradation

Geethakarthi, A.

doi:10.1007/978-981-16-0065-4_2

Cited by 1 publication

(1 citation statement)

References 103 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Te physicochemical and biological treatment approaches have been developed to lower the extent of coloring and organic materials from efuents [13,14]. Te physicochemical methods such as photocatalysis [15], focculation/coagulation [16][17][18], sonication, sludge adsorption [19], ion exchange [20,21], activated carbon adsorption [22][23][24], ozonation [25,26], irradiation, and electrochemical oxidation [27,28] were well studied for small scale industries. Te biological approaches [29][30][31][32] of treatment using fungi [33], algae, yeast, bacteria, plants [34][35][36], and animal [37] wastes were considered as costefective, sustainable, and environmentally benefcial approach [38][39][40] while being specifc in use.…”

Section: Introductionmentioning

confidence: 99%

Color Adsorption Performance of Bone Biocomponent for Textile Dyeing Effluent Treatment in Ethiopia

Kokeb,

Tesfaye,

Sharew

et al. 2023

Journal of Engineering

View full text Add to dashboard Cite

The continued expansion of industrial growth has contributed significantly to the economic development of many countries. However, untreated discharge from the textile factory significant impacts freshwater and public health. The aim of this study is to explore the economical-local wastewater treatment for local textile industries. The experiment used the waste bones as a source of calcium-phosphate nanopowder (CNP) biocomponent, adsorbent for azo dye effluent treatment. An isolated biocomponent was analyzed using FTIR and UV-VIS, and its adsorption isotherm was also calculated. The FTIR analysis of CNP showed carbonates, amide, and high-intensity phosphate peaks of 1008 cm−1 and 1337 cm−1. The effect of contact time analyzed by UV-VIS absorption spectra revealed that 70% of color removal was achieved within 30 minutes and 60 minutes for disperse red 1 dye (DR1D) and DCT reactive blue 109 dyes (RB109D), respectively. In addition, the effects of the condition parameters on percentage color removal were analyzed using DOE response surface methodology. The maximum color removal performances are 98.65% and 96%, respectively, for DR1D and RB109D at neutral pH. The Langmuir isotherm was observed in the adsorption of RB109D effluent with an R2 value of 0.994 and the Freundlich isotherm in the adsorption of DR1D with an R2 value of 0.993. Finally, the gauge of the effectiveness of treatment was analyzed by COD, BOD, and TSS values before and after treatment. The maximum deduction percentages of COD, BOD, and TSS were 82, 87, and 70% from RB109D; 89, 90, and 89% from DR1D; and 82, 89, and 71% from the industry sample, respectively. Generally, the study showed that the current adsorbent was a good substitute for synthetic adsorbents.

show abstract