Analytical modeling of mine water rebound: Three case studies in closed hard-coal mines in Germany

Abstract

Purpose.In this paper we present and validate an analytical model of water inflow and rising level in a flooded mine and examine the model robustness and sensitivity to variations of input data considering the examples of three closed hard-coal mines in Germany. Methods. We used the analytical solution to a boundary value problem of radial ground water flow to the shaft, treated as a big well, and water balance relations for the series of successive stationary positions of a depression cone to simulate a mine water rebound in the mine taking into account vertical distribution of hydraulic conductivity, residual volume of underground workings, and natural pores. Findings. The modeling demonstrated very good agreement with the measured data for all the studied mines. The maximum relative deviation for the mine water level during the measurement period did not exceed 2.1%; the deviation for the inflow rate to a mine before its flooding did not exceed 0.8%. Sensitivity analysis revealed the higher significance of the residual working volume and hydraulic conductivity for mine water rebound in the case of thick overburden and the growing significance of the infiltration rate and the flooded area size in the case of lower overburden thickness. Originality.The developed analytical model allows realistic prediction of transient mine water rebound and inflow into a mine with layered heterogeneity of rocks, irregular form of the drained area, and with the inflow/outflow to a neighboring mine and the volume of voids as a distributed parameter without gridding the flow domain performed in numerical models. Practical implications.The study demonstrated the advantages of analytical modeling as a tool for preliminary evaluation and prediction of flooding indicators and parameters of mined out disturbed rocks. In case of uncertain input data, modeling can be considered as an attractive alternative to usually applied numerical methods of modeling ground and mine water flow.

Simulation of Leaching Processes of Polymetallic Ores Using the Similarity Theorem

“…One of the drilling methods was proposed by the scientists of Dnipro University of Technology (Dudlia et al, 2018;Shyrin et al, 2018). Water control was also justified (Caceres and Alca, 2016;Bazaluk et al, 2021;Rudakov and Westermann, 2021). So, having considered the spatial location of the leached area, we will turn to the definition of technological parameters.…”

Formation Mechanism of “Large-Area Sweating” Water Seepage from Deep Mine Sandstone Pores

“…Quaternary sandy soil has a loose structure and abundant pore water, which is a primary concern for hydrogeology and civil engineering projects [18][19][20][21]. Rudakov and Westermann presented and validated an analytical model of water inflow and rising level in a flooded mine by comprehensively considering various voids and the heterogeneities of rocks [22]. The results of the above studies inform the continued study of pore seepage in sandstone.…”

Hydraulic Characteristics Analysis of Double-Bend Roadway of Abandoned Mine Pumped Storage

“…Based on the flow equation of air and water under different operating conditions of the abandoned mine pumped storage power station, Ye Peng [24] used the Fluent software to conduct numerical simulation and analyzed the influence of different geometric designs on water-air flow characteristics as well as water energy utilization rate under each operating conditions. Rudakov, D. et al [25] presented and validated an analytical model of water inflow and rising levels in a flooded mine and examined the model's robustness and sensitivity to variations of input data considering the examples of three closed hard coal mines. However, the above studies mainly consider the influence of external factors such as economy and environment, as well as the roadway structure, such as the ventilation shaft and surge chamber, on the overall space of the roadway.…”