Analysis of the technological process of welding a membrane wall with Inconel 625 nickel alloy

Abstract

Research carried out by the authors of this paper is focused on the technological process of Inconel 625 welding with the MAG - CMT method. Inconel 625 was welded on the substrate material, which was 16Mo3 steel. Both materials are used to produce so-called bimetallic tubes, which in practice serve as part of the equipment intended for waste incineration. For this reason, the bimetallic tubes have to withstand extreme conditions during their operation. Therefore, bimetal pipes are highly stressed composite components that must resist corrosion in a chemically aggressive environment. For this reason, an extensive material and technological analysis of the production of pipe bends with a supercritical bend of 0.7D from bimetal pipes with Inconel 625 cladding was performed. In the welding process, the authors investigated the possibilities of the CMT method with and without divergence. The most important factor in deciding which method would be appropriate was to measure the amount of iron on the surface of the coating layer. The authors' paper builds on the authors' previous research in this area, which was mainly focused on research on critical bending of bimetallic tubes.