Analysis of Contact Mechanical Characteristics of Flexible Parts in Harmonic Gear Reducer

Abstract

Harmonic gear reducer is widely used in industrial robots, aerospace, optics, and other high-end fields. The failure of harmonic gear reducer is mainly caused by the damage of flexible bearing and flexspline of thin-walled vulnerable components. To study the contact mechanical characteristics of flexible components such as flexible bearing and flexspline in harmonic gear reducer, the contact mechanical model of flexible bearing, vibration differential equation of flexspline, and finite element model of each component in harmonic gear reducer were established. Based on the established model of harmonic gear reducer, the influence of the length of flexspline cylinder and the thickness of cylinder bottom on the stress of flexspline is discussed, respectively, and the motion characteristics of flexible bearing are studied. At the same time, the spatial distribution of the displacement of the flexspline and the axial vibration response of the flexspline are studied. The correctness of the model established in this paper is verified by experiments. The results show that the increase of cylinder length can improve the stress of flexspline in harmonic gear reducer; the wall thickness of cylinder bottom mainly affects the stress at the bottom of flexspline but has little effect on the stress of gear ring and smooth cylinder. Along the axis direction of the flexspline, the radial displacement, circumferential displacement, and angular displacement increase linearly with the increase of the axial distance between the cylinder and the bottom. When the excitation frequency is high, the vibration mode of flexspline shell is mainly axial vibration. The research results will provide a theoretical reference for the optimal design of harmonic gear reducer and improving the service life of flexible parts.

Dynamic Modeling and Vibration Characteristics Analysis of Deep-Groove Ball Bearing, Considering Sliding Effect

“…Li e al. [16] established the contact mechanics model of flexible bearing and analyzed the mo tion characteristics of flexible bearing. Liu et al [17,18] proposed a bearing dynami model, considering the influence of defects, and applied the model to study the influenc of defect morphology on bearing contact characteristics.…”

“…Zhu et al [15] proposed a transfer learning method based on multilayer perceptron to predict the remaining life of bearing under different working conditions. Li et al [16] established the contact mechanics model of flexible bearing and analyzed the motion characteristics of flexible bearing. Liu et al [17,18] proposed a bearing dynamic model, considering the influence of defects, and applied the model to study the influence of defect morphology on bearing contact characteristics.…”

Innovative Design and Machining Verification of a Dual Axis Swivel Table for a Milling Machine

“…The rotation and tilting axis are driven by harmonic drivers and servo motors. The harmonic driver has been widely used as the joint actuator in robotic system, in which the contact mechanical characteristics of the flexible parts in harmonic gear reducer are shown to have great influence on the motion and vibration characteristics [5]. Therefore, in order to achieve development goals, designers must evaluate the structure characteristics and specifications of driving components within the desired spatial configuration of the rotary module [6,7].…”

Design study on small transmission ratio harmonic reducer with new profile wave generator

“…Chen et al 22 presented a new analysis method to calculate the stretch in the FS neutral line. Li et al 23 analyzed the contact mechanical characteristics of flexible parts in the HR. Routh et al 24 investigated secondary force contacts of tooth pairs in HRs with involute toothed gear set.…”