“…The downward peaks indicated a heat release, and the enclosed area was proportional to the enthalpy change of the sample. The initial melting temperature, Tonset, and the peak temperature, Tpeak, can be obtained from DSC spectra [3,4].For the system with a eutectic melting point there are a variety of the physical meaning for the points of Tonset and Tpeak [5,6]. In this paper, when the heating up of the solid samples of BHT mixture, the first endothermic peak, Tonset, is considered as the temperature of eutectic composition, The Tpeak, the temperature of the second peak is considered as the melting temperature of the measured samples, as shown in Fig.…”