An experimental assessments on different control techniques of series hybrid active power filter

Abstract

SUMMARYFor high power application of active power filters, series hybrid active power filter (SHAPF) configuration is popular because of its multi-functionality and small capacity inverter requirement. The SHAPF filtering characteristics and efficiency of harmonic compensation depend on the control algorithm applied to calculate the reference voltage. This paper compares the filtering performance of SHAPF using three different control algorithms applied for reference voltage generation. The first control algorithm derives reference voltage proportional to the source current harmonics, where the source current harmonics are separated using the p-q theory. The second control algorithm derives reference voltage from load voltage harmonics separated using the dual p-q theory. The third control algorithm derives reference voltage using vector algebra-based voltage decomposition method in three-phase coordinate system. The mathematical formulation of selected three control algorithms along with their applications to SHAPF is presented. To check the filtering performance of SHAPF with selected control algorithms, an experimental prototype of SHAPF controlled by the ARM Cortex M4 microcontroller STM32F407VGT6 is developed. Experiments are performed to check the performance of SHAPF in compensating current harmonic generating load and voltage harmonic generating load. The results of compensation, the complexity involved in extracting reference, and control algorithm computation time are compared. The comparison shows that the operation of the voltage decomposition method is comparatively better due to fast extraction of the reference voltage.

Novel PV-tied UPQC topology based on a new model reference control scheme and integral plus sliding mode dc-link controller

“…Conventional mitigation principles and conditioners are inadequate to eliminate power quality problems such as current harmonics, voltage sag/swell, and unbalance voltage. Literature report about advanced and improved power conditioners such as active power filters, DSTATCOM, [1][2][3][4] and dynamic voltage restorer, 5,6 which regulate various current and voltage power quality issues. However, these mitigation methodologies are inadequate to solve power quality problem simultaneously for current harmonics, voltage sags/swells, and voltage unbalances.…”

Power quality enhancement by hybrid DSTATCOM with improved performance in distribution system

“…But in this method, the number of switching devices and passive elements are increased. A series hybrid active filter is discussed with small inverter capacity rating 13 . But it requires an extra diode bridge and single‐phase source for dc‐link capacitor charging.…”

“…A series hybrid active filter is discussed with small inverter capacity rating. 13 But it requires an extra diode bridge and single-phase source for dc-link capacitor charging. In the above discussed topologies, the dc-link voltage of VSI is maintained constant to reference dc-link voltage, which is calculated based on rated reactive load.…”