An approach for fabrication of micrometer linear ZnO/Ti3C2Tx UV photodetector with high responsivity and EQE

Abstract

Two-dimensional MXenes have shown impressive semiconductor-like properties associated with their ultrathin-atomic-layer structure. Herein, ZnO/Ti3C2Tx hybrid structures were fabricated by a simple dipping method. Photodetectors (PDs) made of ZnO/Ti3C2Tx hybrid on glass fiber exhibit significantly enhanced photodetect ability. The responsivity of ZnO/Ti3C2Tx PD is 5.05 A/W when illuminated by 365 nm light (0.28 mW/cm2) at a bias of 5 V, which is 360 times that of ZnO PD (0.014 A/W). The synergistic effect of the formation of the novel heterostructure and the high conductivity of Ti3C2Tx played a major role in the enhanced photodetect performance. The high responsivity of 7.01 A/W and the high external quantum efficiency of 2386% for ZnO/Ti3C2Tx PD give it great potential for a UV light photoswitch and image sensor. This work sheds light on the utilization of two-dimensional MXene materials in high-performance optoelectronic devices.

Ti3C2Tx (MXene)-wrapped V2O5/Fe2O3 composites for enhanced-performance supercapacitors

“…After being coated with Ti 3 C 2 T x , a new peak appears at 7.51 compared with the XRD pattern of VFO/CC (Fig. 1e), corresponding to the peak of Ti 3 C 2 T x , 25 which confirms that Ti 3 C 2 T x is successfully coated on the VFO/CC-8 composite. The XPS survey spectrum of 2.0-Ti 3 C 2 T x @VFO/CC reveals the Ti, C, O, Fe, V and F elements as the main constituents (Fig.…”

Dual‐Band Perovskite Bulk Heterojunction Self‐Powered Photodetector for Encrypted Communication and Imaging

“…. [33] The fitting τ 1 and τ 2 values are both 370 ns, demonstrating the fast recombination speed of electrons and holes when the light is off. The performance of our PD is better than that of other literature reports, as shown in Table S1, Supporting Information.…”

Air Induced Formation of Cs3Bi2Br9/Cs3BiBr6 Bulk Heterojunction and Its Dual‐band Photodetection Abilities for Light Communication

“…, where I l is the light current, I d is the dark current, P is the power density, and A is the effective light area) and detectivity [23,24] (…”