An approach for developing sensitive design parameter guidelines to reduce the energy requirements of low-rise apartment buildings

Abstract

a b s t r a c tHigh levels of energy consumption in residential buildings and global warming are important issues. Thus the energy performance of buildings should be improved in the early stages of design. This article describes an approach for developing guidelines on sensitive and robust design parameters for the present, the 2020s, the 2050s and the 2080s. Such guidelines can help architects to design low-rise apartment buildings that require less energy for various purposes, such as heating or cooling. The article consists of a general literature review, interviews with architects, the generation of case-specific information and a mock-up presentation and a meeting with professionals. An example guideline that aims to reduce annual cooling energy loads under global warming in low-rise apartment buildings located in hot-humid climates is presented to demonstrate how the proposed approach can be applied. For this guideline, case-specific information was generated, and a global sensitivity analysis based on Monte Carlo Analysis and the Latin Hypercube Sampling technique was performed. The results show that the suggested approach is feasible and could be used to provide helpful information to architects during the design of low-rise apartment buildings with high energy performance. The most sensitive design parameters that affect annual cooling energy loads in low-rise apartment buildings were natural ventilation, window area, and the solar heat-gain coefficient (SHGC) of the glazing. The results are relevant for the present, the 2020s, the 2050s and the 2080s.

Predicting the Impact of Climate Change on Thermal Comfort in A Building Category: The Case of Linear-type Social Housing Stock in Southern Spain

“…The findings of the sensitivity analysis performed (see Section 2.1) ( Figure 8) show that the parameters with the greatest influence on thermal comfort-i.e., the highest |SRRCs|-are those related to user behaviour (operational parameters). According to the literature, |SRRC| values over 0.05 [38] or 0.1 [66] are considered relevant. With regards to the geometry, only 'floor height', 'form ratio', 'area of each floor' and orientation ('north axis') can be considered outstanding-with an |SRRC| value over 0.20.…”

Impact of passive climate adaptation measures and building orientation on the energy demand of a detached lightweight semi-portable building

“…This procedure, reported by Jentsch et al (2008Jentsch et al ( , 2013 and also used by other researchers (e.g. Invidiata and Ghisi 2016;Kolokotroni et al 2012;Yildiz et al 2012), is based on the HadCM3 A2 experiment which was promoted by the International Panel for Climate Change (IPCC). As indicated in the CCWorldWeatherGen manual (2013), if the current climate weather file (i.e.…”

A new methodology for investigating the cost-optimality of energy retrofitting a building category

“…Thus, the SRRCs are selected as sensitivity indices, since they are fine for non-linear (but monotonic) functions between inputs and outputs. This choice is largely shared in the BPS community [65,66]. In particular, the SRRC provides a measure of how influential a parameter is on an output, based on the effect of moving such parameter away from its expected value while retaining all other parameters constant.…”