All‐Direct‐Ink‐Writing of Artistic Supercapacitors: Toward On‐Demand Embodied Power Sources

Abstract

Despite the extensive studies on printed power sources for user‐customized shape‐versatile electronics, most of them have still focused on printing of electrochemically active materials, with little attention to passive components such as current collectors and packaging, thus hindering their versatile application. Here, all‐direct‐ink‐writing (DIW) of artistic supercapacitors (ASCs) as a facile and scalable strategy to enable power source‐unitized monolithic electronic devices with various form factors is demonstrated. Interdigitated nickel current collectors embedded inside a polyurethane support layer are fabricated using DIW printing, which can facilitate the subsequent printing of multi‐scale, ultrathick electrodes. Interstitial voids between the DIW‐printed adjacent electrode layers are densely infiltrated by click‐crosslinkable electrolyte inks with well‐tuned rheological properties. The void‐free electrode/electrolyte assembly is conformally printed with a waterproof packaging ink to enable hermetic encapsulation, eventually producing all‐DIW‐printed ASCs with efficient space utilization, design diversity, and dimensional scalability. Notably, the resulting ASC can be seamlessly unitized with arbitrary‐shaped 3D objects (e.g., miniature pagodas), allowing for the potential development of on‐demand embodied power sources for electronic devices.

Advances in Printing and Electronics: From Engagement to Commitment

“…The highest value achieved was of 15.7 mF cm −2 for 10-stacked electrodes. [367] Additionally, SCs presenting great flexibility were screen printed based on PVA/KOH electrolyte-soaked fabric as a separator, and cost effective MWCNT as electrodes. The proposed sandwiched and all-together SCs revealed areal capacitances of 4.17, and 4.16 mF cm −2 (20 mV s −1 scanning rate), respectively, maintaining their flexibility and high stability even under dynamic bending with high strain rate (20% s −1 ).…”

Liquid Metal-Skinned Zn Powder Anodes Enabled by Capillary Suspension

“…Based on this result, the ratio of dodecane/NMP = 90/10 (v/v) was determined as the optimal point for establishing a stable capillary suspension. Meanwhile, the capillary suspension and model suspensions showed that the storage modulus (G′) was higher than the loss modulus (G″) in the low shear stress region, and the opposite trend was observed in the high shear stress region, indicating a typical viscoelastic fluid behavior 29,30 (Figure 1g). The yield stress (τ y ), determined by the intersection of G′ and G″, of the capillary suspension (823.83 Pa) was much higher than those of the NMP-based (2.95 Pa) and dodecane-based (0.62 Pa) model suspensions.…”