Advances in Metal Forming

Abstract

The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

Optimization and Mapping of the Deep Drawing Force Considering Friction Combination

“…The biggest permissible drawing force is constrained by the force which can be transferred by the sheet metal in the zone of the punch nose radius or at the transmission from cup wall to the bottom cup radius, which is named the cracking force [7]. It should be dependably higher than the maximum value of the deep drawing force.…”

“…The evolutionary algorithm uses the results of the system to find factors that are preferable to maintaining a consistent thickness in the final cup. A complex blank stamping procedure may be examined under particular assumptions, allowing the use of the multi-objective optimization approach to be used [7]. After multi-objective optimization methods are created for a sheet metal forming problem, special considerations are given to conflicting objectives [8].…”

Metallurgical Analysis of Steel Plate for Deep Drawing Application

“…Schematic of deep drawing process [1] The drink cup is manufactured through following steps: 1. Blanking Blanking is the first step in the deep drawing process.…”