Optimization and Mapping of the Deep Drawing Force Considering Friction Combination

Abstract

Deep drawing is characterized by extremely complex deformation that is influenced by process characteristics such as die and punch shapes, blank shape, blank holding force, material properties, and lubrication. The optimization of the deep drawing process is a challenging issue due to the complicated functions that define and relate the process parameters. However, the optimization is essential to enhance the productivity and the product cost in the deep drawing process. In this paper, a MATLAB toolbox (Pattern Search) was employed to minimize the maximum deep drawing force (Fd-min) at different values of the operating and the geometrical parameters. As a result, a minimum deep drawing force chart (carpet plot) was generated to show the best combination of friction coefficients at the blank contact interfaces. The extracted friction coefficients guided the selection of proper lubricants while minimizing the deep drawing force. A finite element analysis (FEA) was applied through 3D model to simulate the deep drawing process. The material modeling was implemented utilizing the ABAQUS/EXPLICIT program with plastic anisotropy. The optimization results showed that the deep drawing force and the wrinkling decrease when compared with experimental and numerical results from the literature.

Research on Deep Drawing Technology for Tiny Parts Applied in the Electrical-Electronic Industry

“…Research projects on the influence of parameters such as blocking force and die geometry on the quality of stamping products, such as limiting earing height, wrinkling, and tearing [6], [7], [8], [9], [10], [11], [12], [13], [14], [15], [16]. Research on the effects of friction to improve drawing efficiency has been published [17], [18], [19], [20], [21], [22], [23], [24], [25]. The influence of material parameters on the quality of stamping products has been reported [26].…”