Active vibration control of a blade element with uncertainty modeling in PZT actuator force

Sivrioğlu, Selim; Bolat, Fevzi Çakmak; Ertürk, Ercan

doi:10.1177/1077546319868883

Cited by 14 publications

(11 citation statements)

References 27 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Ma et al [ 55 ] investigated an AVC of a moving cantilever beam with PZT ceramics as an actuator using a pulse derivative closed-loop feedback system. Sivrioglu et al [ 56 ] successfully attempted to attenuate a blade’s vibration with a PZT actuator patches using a robust multi-objective control. Sharma et al [ 57 ] measured the controlled response of a fuzzy logic controller for various PZT materials in AVC and compared them with each other.…”

Section: Introductionmentioning

confidence: 99%

Smart Active Vibration Control System of a Rotary Structure Using Piezoelectric Materials

Hashemi

Jang

Hosseini-Hashemi

2022

Sensors

View full text Add to dashboard Cite

A smart active vibration control (AVC) system containing piezoelectric (PZT) actuators, jointly with a linear quadratic regulator (LQR) controller, is proposed in this article to control transverse deflections of a wind turbine (WT) blade. In order to apply controlling rules to the WT blade, a state-of-the-art semi-analytical solution is developed to obtain WT blade lateral displacement under external loadings. The proposed method maps the WT blade to a Euler–Bernoulli beam under the same conditions to find the blade’s vibration and dynamic responses by solving analytical vibration solutions of the Euler–Bernoulli beam. The governing equations of the beam with PZT patches are derived by integrating the PZT transducer vibration equations into the vibration equations of the Euler–Bernoulli beam structure. A finite element model of the WT blade with PZT patches is developed. Next, a unique transfer function matrix is derived by exciting the structures and achieving responses. The beam structure is projected to the blade using the transfer function matrix. The results obtained from the mapping method are compared with the counter of the blade’s finite element model. A satisfying agreement is observed between the results. The results showed that the method’s accuracy decreased as the sensors’ distance from the base of the wind turbine increased. In the designing process of the LQR controller, various weighting factors are used to tune control actions of the AVC system. LQR optimal control gain is obtained by using the state-feedback control law. The PZT actuators are located at the same distance from each other an this effort to prevent neutralizing their actuating effects. The LQR shows significant performance by diminishing the weights on the control input in the cost function. The obtained results indicate that the proposed smart control system efficiently suppresses the vibration peaks along the WT blade and the maximum flap-wise displacement belonging to the tip of the structure is successfully controlled.

show abstract

Section: Introductionmentioning

confidence: 99%

Smart Active Vibration Control System of a Rotary Structure Using Piezoelectric Materials

Hashemi

Jang

Hosseini-Hashemi

2022

Sensors

View full text Add to dashboard Cite

show abstract

“…Sivrioglu et al. [10] used robust multi‐objective control to reduce vibrations on a small‐scale wind turbine blade with an attached piezoelectric layer actuator. According to Abdeljaber et al.…”

Section: Introductionmentioning

confidence: 99%

“…Sivrioglu et al [10] used robust multi-objective control to reduce vibrations on a small-scale wind turbine blade with an attached piezoelectric layer actuator. According to Abdeljaber et al [11], piezoelectric sensor/actuator pairs were used to study the active vibration of flexible cantilever plates.…”

Section: Introductionmentioning

confidence: 99%

Vibration suppression of thick plates with attached piezoelectric patches using 1D Carrera Unified Formulation (CUF) based finite element models

2022

View full text Add to dashboard Cite

The first six vibration modes of a thick plate with 10 piezoelectric sensoractuator pairs are suppressed using advanced beam elements based on the one-dimensional Carrera Unified Formulation (CUF). A three-dimensional model is developed by combining one-dimensional beam elements with twodimensional Lagrange expansions in this paper. For the reduction of vibration of a thick cantilever plate, a PIDF type control is designed and tuned. Based on the results of the simulation, it can be concluded that the simulation of thick plate models with impulse inputs is efficient as well after model order reduction.

show abstract

“…[13], vibration control of cylindrical shells using piezoelectric actuators was studied and the actuator patch configuration was optimized through multi-parameter optimization method. Selim et al used an attached piezoelectric actuator to suppress vibrations of a small-scale wind turbine blade, and a vibration reduction of 50.28dB was achieved in the first mode [14].…”

Section: Introductionmentioning

confidence: 99%

A Double-Acting Piezoelectric Actuator for Helicopter Active Rotor

2021

View full text Add to dashboard Cite

An active rotor with trailing-edge flaps is an effective approach to alleviate vibrations and noise in helicopters. In this study, a compact piezoelectric actuator is proposed to drive trailing-edge flaps. The two groups of piezoelectric stacks accommodated in the actuator operate in opposition, and double-acting output can be realized through the differential motion of these stacks. A theoretical model and a finite element model are established to predict the output capability of this actuator, and structural optimization is performed using the finite element model. A prototype is built and tested on a benchtop to assess its performance. Test results demonstrate that the actuator stiffness reaches 801 N/mm, and its output stroke is up to ± 0.27 mm when subjected to actuation voltage of 120 V. Agreement between measurements and simulations validates the accuracy of the established models. In addition, actuator outputs in failure modes are measured by canceling the supply voltage of one group of piezoelectric stacks. In this condition, the actuator can still generate acceptable outputs, and the initial position of the output end remains unchanged. Simulations and test results reveal that the proposed actuator achieves promising performance, and it is capable to be applied to a helicopter active rotor.

show abstract

Active vibration control of a blade element with uncertainty modeling in PZT actuator force

Cited by 14 publications

References 27 publications

Smart Active Vibration Control System of a Rotary Structure Using Piezoelectric Materials

Smart Active Vibration Control System of a Rotary Structure Using Piezoelectric Materials

Vibration suppression of thick plates with attached piezoelectric patches using 1D Carrera Unified Formulation (CUF) based finite element models

A Double-Acting Piezoelectric Actuator for Helicopter Active Rotor

Contact Info

Product

Resources

About