A Viable Mission Profile Emulator for Power Modules in Modular Multilevel Converters

Abstract

Various methods have been presented in the past to emulate the electrical behavior of Modular Multilevel Converters (MMCs). To meet the demands for the reliability aspect study of MMCs, this paper proposes a minimum viable setup to emulate the thermal behavior and to investigate its feasibility for reliability testing and thermal model validation of the power modules in the MMC. The proposed mission profile emulator has three distinctive features: 1) Capable of emulating and measuring the thermal stresses of power modules; 2) Capable of implementing practical switching profile as a full-scale MMC; and 3) Having significantly reduced requirement for DC power supply compared to existing setups used for electrical studies. Theoretical discussions, and simulations as well as the experimental results are presented to demonstrate the capability of the mission profile emulator both electrically and thermally. Moreover, this paper is accompanied by a video demonstrating how to measure the junction temperature of the power devices using the optical fiber and the thermal camera.

An On-Line Calibration Method for TSEP-Based Junction Temperature Estimation

“…The accuracy of the proposed calibration method is mainly affected by the assumptions made while calculating a and b. To analyze it quantitatively, the thermal impedances of the applied IGBT module are measured experimentally through the method presented in [26]. Fig.…”

Power Electronics Reliability: State of the Art and Outlook

“…To support such a superimposed stress test, advanced mission profile emulators are necessary. For example, in [83][84][85], the emulators for motor drives and Modular Multi-level Converters (MMCs) are proposed, respectively.…”

An Approach for Estimating the Reliability of IGBT Power Modules in Electrified Vehicle Traction Inverters

“…In a grid or EV powertrain, it is necessary to consider the data profile for actual lifespan analysis. Previous research on inverter lifetime analysis [17][18][19][20], considers the mission profile from the collected load curve based on consumers use. The conventional reliability analysis has been done with standard drive cycle which hardly match with practical scenario.…”