A Study on Multi-Objective Parametric Design Tool for Surround-Type Movable Shading Device

Abstract

This study presents a multi-objective parametric design tool for four-axis surround-type movable shading device using solar position tracking in Seoul, South Korea. In order to explore large numbers of possible forms of shades, generic algorithms are utilized with real-time simulation of the performative criteria such as solar radiation, daylight glare probability (DGP), and solar shielding rate on window surface. This study outlines a workflow using a multi-objective engine called Octopus that runs within Grasshopper 3D, a parametric design tool, in addition to environmental performance simulation plug-in Ladybug. The workflow utilizes a performance-based design tool, which allows the designer to explore, sort, and filter solutions, and visually compare alternative solutions in terms of energy saving and indoor daylight quality in order to determine the optimal form of shade changing its shape every one hour. The result of deriving and analyzing the optimal shade shape through the genetic algorithm proposed in this study is as follows: On the one hand, on the summer solstice, shade shapes with shielding areas of almost 100% should be derived to achieve the most effective reduction of the direct solar radiation. The proposed movable shading device reduced direct solar radiation by 52.40% and 57.20% in the south-and east-facing windows, respectively. On the other hand, in winter when solar heat gain is important, the absence of sunshade is optimal in terms of heating load. However, in order to improve the indoor light environment, it is confirmed that it is possible to derive a certain shape of sunshade according to the sun's trajectory. On the winter solstice, the problem of glare arises from 10:00 to 15:00 in the south and 10:00 in the east. Therefore, the proposed four-axis movable shading device can be configured to have a minimum protrusion length satisfying DGP less than 0.35 in winter.

Optimum external shading system for counterbalancing glare probability and daylight illuminance in Sydney's residential buildings

“…However, a significant problem with applying fixed shading is finding the optimum features that alleviate discomfort factors while maximising comfort parameters. The issue has grown in importance in light of recent studies trying to devise movable shading systems (Kim et al , 2019; Wang et al , 2020b). In the sense of glare reduction, internal shading devices are less contributive since they block the sun rays after penetrating the room.…”

Design Optimization of Hyperboloid Wooden House Concerning Structural, Cost, and Daylight Performance

“…The optimization was based on genetic algorithms (GA) conducted using a plugin called Octopus as the MOO solver, as it was also adopted in [54][55][56]. This phase's main goal is to optimize the design objective in terms of both structural factors and daylight.…”

The Effect of Fixed External Shading Devices on Daylighting and Thermal Comfort in Residential Building

“…Eggcrate-shaped shadows combine vertically and horizontally, regardless of orientation, taking into account both solar and azimuth heights. However, one of the disadvantages is that the function of natural light is lost due to excessive protection [13]. Figure 4, shows the modeling of the different types of external fixed shading devices that are placed and analyzed on the south façade's windows of the residential building.…”