A Study of the Factors Affecting the Separation Force of Artificial Leather Laminating Process

Pimapunsri, Kusol; Wuttipornpun, Teeradej; Veeranant, Darawan

doi:10.4028/www.scientific.net/kem.728.307

Cited by 7 publications

(7 citation statements)

References 14 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Nowadays, artificial leather has becomeimportant materials that widely used to substitute genuine leather in the automotive interior, clothing, footwear, sofa fabric, decoration, and other application (Pimapunsri et al, 2017). Comparing to genuine leather, these materials have stable production and lower production price, thus have obtained a good market (Gurera & Bhushan, 2018).…”

Section: Introductionmentioning

confidence: 99%

“…Spreading is most widely used in the manufacturing of artificial leather. This method consists of coating plastisol on a moving fabric using a roller or a knife (Pimapunsri et al, 2017;Rybachuk et al, 2007). The processing through plastisol is one of the most efficient procedures since its ease processing and low equipment costs (Rybachuk et al, 2007;Zadhoush et al, 2004).…”

Section: Introductionmentioning

confidence: 99%

“…There is some research that already discussed on artificial leather such as on surface modification (Sakmat et al, 2015), processing (Roh et al, 2014), thermal and mechanical properties modification (Ma et al, 2019;Maia et al, 2017;Pimapunsri et al, 2017;Yang et al, 2017). And some paper has also studied the effect of k-value into the rheological behavior of plastisol (Zadhoush et al, 2004) and molecular weight distribution (Pepperl, 2000).…”

Section: Introductionmentioning

confidence: 99%

See 2 more Smart Citations

The effect of PVC’s resin K-value on the mechanical properties of the artificial leather

Syabani

Devi

Hermiyati

et al. 2020

MKKP

View full text Add to dashboard Cite

Artificial leather offer wide variety of application thus the demand is increased over time. The variation of the product needs different properties that can be achieved using resin with suitable k-value.This works reports the influence of the resin k-value on the mechanical properties of the artificial leather. The combination of various resin with different k-value (66, 68, 72, 74, and 76)is used and the tensile strength and elongation at break of the product were evaluated. The results show that blending the PVC resin with different k-value can be used to adjust the easier processing of the lower k-value and better mechanical properties of the higher k-value. Larger k-value differences between two resin make more difficulties of resin blending thus give more defect. For the blending of two resin, the tensile strength and elongation value would be between both of the resin initial properties. The final properties will be closer to the resin with a higher percentage in the resin blending.

show abstract

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

The effect of PVC’s resin K-value on the mechanical properties of the artificial leather

Syabani

Devi

Hermiyati

et al. 2020

MKKP

View full text Add to dashboard Cite

show abstract

“…Over the past few decades, the fashion industry and scientific researchers have gradually pushed for the development of leather substitutes, leading to the design of numerous synthetic and natural materials [1,2]. Today, synthetic leather is an important material that is widely used in place of genuine leather in products, including clothes, footwear, sofa fabric, home decor, and car interiors [3]. Due to their consistent manufacture and lower production costs than genuine leather, these materials have a strong market [4].…”

Section: Introductionmentioning

confidence: 99%

Preliminary Mechanical Characteristics of Bio-Composite Materials Faux Leather Based on Orange Peel Waste

Rimantho,

Chaerani,

Sundari

2024

Preprint

View full text Add to dashboard Cite

Naturally-derived synthetic leather is a widely used and high-quality type of faux leather or synthetic leather. Many consumers prefer authentic leather goods due to their exceptional qualities, including high water vapor permeability and superior wearing comfort. Consequently, the exploration of artificial leather made from natural materials with exceptional qualities as an alternative to genuine leather has garnered significant interest and is now a highly studied subject. Synthetic leather, sometimes known as imitation leather, has gained popularity recently as a highly suitable alternative to genuine leather. Continuous advances in this area of research increase the range of uses for synthetic leather using natural fibers. Thus, this research aims to explore synthetic leather materials using orange peel waste, which can be applied to the fashion industry. This research applies several types of orange peel waste, such as Pomelo, Sweet orange, and Sunkist orange, to different compositions and strengthening materials, such as bandages and dacron. The resulting bio-composite materials' morphology, mechanics, and adhesive properties were evaluated following ASTM D 2209-00 and ASTM D 4533-04 standards. The results indicate that specimen 1A (Pomelo using bandage as reinforcement) has the most significant effects, with a tensile test value of approximately 472 N/cm2, an elongation of roughly 67.28 % was the highest value on sweet orange using bandage as reinforcement, and a tear resistance of around 14.28 N/cm2 for Pomelo with bandage as reinforcement. Furthermore, the test results also show that composition 2B still does not meet the standards of SNI 1294:2009 and ISO 3376 for tensile strength and ISO 3377-1 for tear strength. Additionally, statistical analysis showed no appreciable changes in the samples analyzed. Furthermore, statistical evaluations showed no significant alterations in the studied samples. The results of this experimental investigation can be explored further and used as a basic framework for the creation of bio-composites from orange peel waste for future fashion.

show abstract

“…Polyvinyl chloride-coated polyethylene terephthalate (PVC-coated PET) fabric is a type of artificial leather that is made by coating plastisol on a moving fabric using a roller or a knife (Khaothong, 2019; Pimapunsri et al, 2017; Syabani et al, 2020). Plastisol is prepared by mixing the components (PVC resin, fillers, pigments, plasticizers, stabilizer, blowing agent and the expansion accelerator) in certain sequences (Braun, 2002; Khaothong, 2019; Pimapunsri et al, 2017; Syabani et al, 2020).…”

Section: Introductionmentioning

confidence: 99%

Comprehensive investigation of recycled PVC powder

Chaouch,

Msahli,

Jeguirim

et al. 2024

Waste Manag Res

View full text Add to dashboard Cite

This study constitutes a comprehensive investigation centred on comprehending the behaviour and characteristics of recycled polyvinyl chloride (PVC) powders. The overarching objective is to successfully conclude the initial research phase, during which PVC-coated fabric offcuts undergo a transformation into PVC powder while achieving complete separation from polyethylene terephthalate fibres. The study entails a qualitative description of the morphology of PVC powder particles, employing an optical microscope to distinguish the diverse shapes exhibited by these particles. The optical microscope observations of PVC powder reveal a distinct array of non-spherical particles characterized by flat, elongated shapes. These high-magnification images unveil the intricate morphological features of the particles, highlighting their irregular shapes. Subsequently, a quantitative analysis of PVC particle size distribution is performed, comparing results from optical microscopy with those obtained through mechanical sieving. The qualitative and quantitative findings obtained provide robust evidence supporting the correlation and confirm that most particles are smaller than 600 µm (93.6%) using an optical microscope and the sieving process (96.39%). The greatest fraction (83.44%) is in the size range between 200 and 600 µm. Assessing flowability, another significant aspect in the evaluation of powders, provides insights into its behaviour and interparticle interactions. The flowability results indicate a Compressibility Index of approximately 26.84%, which suggests poor flowability. This means that the powder is likely to encounter difficulties in flowing freely. This finding is in line with the Hausner ratio, which measures 1.37. This investigation of recycled PVC powder will offer insights into the potential applications and processing considerations of this powder. More concretely, the use of recycled PVC powder shows promise as a viable alternative to conventional PVC resin in plastisol formulations, offering the potential to maintain the properties of the final PVC product without adverse effects.

show abstract

A Study of the Factors Affecting the Separation Force of Artificial Leather Laminating Process

Cited by 7 publications

References 14 publications

The effect of PVC’s resin K-value on the mechanical properties of the artificial leather

The effect of PVC’s resin K-value on the mechanical properties of the artificial leather

Preliminary Mechanical Characteristics of Bio-Composite Materials Faux Leather Based on Orange Peel Waste

Comprehensive investigation of recycled PVC powder

Contact Info

Product

Resources

About