A simulation and experimental study of fluid flow and heat transfer on cylindrical oblique-finned heat sink

A parametric investigation of heat transfer and friction characteristics in cylindrical oblique fin minichannel heat sink

“…The uncertainty of f was at 2.98% in the high Re region but it dropped drastically to 20.12% at the low Re region based on the uncertainty analysis. The details of this validation were further discussed in Fan et al [15]. A similar numerical model developed by the same group was validated in [7]; good agreement between simulation and experimental investigation for Reynolds number range of 400-900 (corrected to account for the revised definition of D h [13]).…”

Entropy generation and optimization of laminar convective heat transfer and fluid flow in a microchannel with staggered arrays of pin fin structure with tip clearance

“…Fan et al [10] proposed a oblique fin array on a cylindrical surface with heat source. The result from both numerical and experimental study were presented.…”

Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins

“…31 Fan indicated that the average Nu of microchannel applying fins was much larger. 32 And Lee conducted the corresponding numerical and experimental investigation subsequently. 33 Besides, geometry of pin fin is significant for fluid flowing and heat transfer behaviors, so the investigation on various shapes of pin fin was conducted by some researchers.…”

“…Xia carried out experiments and numerical simulation of flow field to understand the complicated thermal behavior . Fan indicated that the average Nu of microchannel applying fins was much larger . And Lee conducted the corresponding numerical and experimental investigation subsequently …”