A Scale-up Approach for Film Coating Process Based on Surface Roughness as the Critical Quality Attribute

Abstract

Scale-up approaches for film coating process have been established for each type of film coating equipment from thermodynamic and mechanical analyses for several decades. The objective of the present study was to establish a versatile scale-up approach for film coating process applicable to commercial production that is based on critical quality attribute (CQA) using the Quality by Design (QbD) approach and is independent of the equipment used. Experiments on a pilot scale using the Design of Experiment (DoE) approach were performed to find a suitable CQA from surface roughness, contact angle, color difference, and coating film properties by terahertz spectroscopy. Surface roughness was determined to be a suitable CQA from a quantitative appearance evaluation. When surface roughness was fixed as the CQA, the water content of the film-coated tablets was determined to be the critical material attribute (CMA), a parameter that does not depend on scale or equipment. Finally, to verify the scale-up approach determined from the pilot scale, experiments on a commercial scale were performed. The good correlation between the surface roughness (CQA) and the water content (CMA) identified at the pilot scale was also retained at the commercial scale, indicating that our proposed method should be useful as a scale-up approach for film coating process.

Personalised 3D Printed Medicines: Optimising Material Properties for Successful Passive Diffusion Loading of Filaments for Fused Deposition Modelling of Solid Dosage Forms

“…where Zn is the individual height value of the measurement point by the laser reflection measurement, Z is the mean value of all of the height data points, and N is the number of measurement point [28].…”

Optimization Study of Aqueous Film-Coating Process in the Industrial Scale Using Design of Experiments

“…Low spray rate, on the other hand, may result with lower coating efficiency and spray drying. Spray rate along with inlet air temperature may significantly affect appearance of tablets through surface roughness measurement [20]. The speed of the pan is also important for ensuring proper distribution of the coating solution on the tablet bed and therefore coating uniformity.…”