A Review on Factors Influencing the Mismatch Losses in Solar Photovoltaic System

Abstract

In the last two decades, it is persistently emphasized to develop energy generation systems free from greenhouse gas emissions since these gases cause global warming, and it leads to unpredictable monsoons. Consequently, it might not be a conducive environment for human beings and animals to dwell. To ascertain the green environment for the next generations and reduce the use of fossil fuels, renewable energy sources are highly suggested to generate electrical energy. Solar photovoltaic is reckoned to be one of the promising methods to generate electricity; however, it has a lower conversion value due to various losses resulting from external and internal parameters. Among various losses that occurred in the solar photovoltaic system, mismatch loss is imperative, which causes the system to perform poorly. Solar photovoltaic systems have made topical advances in the use of highly effective solar cell materials to achieve high efficiency. In this analysis, performance parameters are influenced by the internal and external conditions of the solar photovoltaic systems and they lead to an increase in the loss of the system. The present review is focused to fetch fruitful information on the several studies that analyzed the effects on the solar photovoltaic systems of parasitic resistances, dust generated by tresses, clouds, solar radiation, temperature, relative humidity, different connection topologies, circuit implementation for partial shading, and remedies suggested by the potential authors.

Numerical Approach toward Ternary Hybrid Nanofluid Flow Using Variable Diffusion and Non-Fourier’s Concept

“…The shape of nanocrystals has a considerable impact and exhibits the best performance. Many researchers have recently scrutinized the physics and use of TiO 2 , MgO, and CoFe 2 O 4 hybrid NF over various geometries. − …”

The use of wavy vortex generators in the cooling system to reduce the photovoltaic temperature rise

“…The use of wavy vortex generators in the cooling system to reduce the photovoltaic … (Gaguk Marausna) 1211 can reduce the amount of electrical energy produced and also have an impact on the efficiency of the device [14]- [16]. This condition will be a problem that must be resolved [17]- [20]. Solar panel cooling systems can be in the form of cooling using air, water, or phase change materials [21]- [23].…”

Experimental Investigation of efficiency enhancement in Solar Photovoltaic Systems under Partial Shading Conditions using Discrete Time Slime Mould Optimization

“…Variations in the irradiance level are due to the PSC caused by the shadow of the building, trees, clouds or the bird droppings [2]. In such a PSC situation, the performance of the PV panel will eventually deteriorates the SPV's maximum power production capacity [3]. MPPT methods took the mandatory position in tracking the MPP of the installed PV array.…”