A “place n play” modular pump for portable microfluidic applications

Abstract

This paper presents an easy-to-use, power-free, and modular pump for portable microfluidic applications. The pump module is a degassed particle desorption polydimethylsiloxane (PDMS) slab with an integrated mesh-shaped chamber, which can be attached on the outlet port of microfluidic device to absorb the air in the microfluidic system and then to create a negative pressure for driving fluid. Different from the existing monolithic degassed PDMS pumps that are generally restricted to limited pumping capacity and are only compatible with PDMS-based microfluidic devices, this pump can offer various possible configures of pumping power by varying the geometries of the pump or by combining different pump modules and can also be employed in any material microfluidic devices. The key advantage of this pump is that its operation only requires the user to place the degassed PDMS slab on the outlet ports of microfluidic devices. To help design pumps with a suitable pumping performance, the effect of pump module geometry on its pumping capacity is also investigated. The results indicate that the performance of the degassed PDMS pump is strongly dependent on the surface area of the pump chamber, the exposure area and the volume of the PDMS pump slab. In addition, the initial volume of air in the closed microfluidic system and the cross-linking degree of PDMS also affect the performance of the degassed PDMS pump. Finally, we demonstrated the utility of this modular pumping method by applying it to a glass-based microfluidic device and a PDMS-based protein crystallization microfluidic device. V C 2012 American Institute of Physics. [http://dx

Diagnosi azkarrera bideratutako gailu mikro-fluidikoen garapen eta azterketa

“…Mikro-ponpak material elastomeroetan modularki diseinatzeko aukera dago, gero txip mikro-fluidikoei gehituz mikro-kanalen barruko emarien kontrola sustatzeko. Kasu honetan, emaria ponparen diseinuaren menpekoa da soilik, eta ez txiparen menpekoa [10].…”

Direct detection of cancer biomarkers in blood using a “place n play” modular polydimethylsiloxane pump

“…39 To increase the pumping energy of degassed PDMS, an array of supporting posts was fabricated in each pumping chamber to increase the area for absorbance of air. 40 The PDMS layer and PDMS stamp were fabricated using the soft lithography replica molding technique. Two template molds were fabricated using standard photolithography on 3-in.…”

An equipment-free polydimethylsiloxane microfluidic spotter for fabrication of microarrays

“…The spotter chip made of PDMS exploits arrays of micro thru-holes combined with discrete dispensing microchannels to easily fabricate user-defined microarrays. In addition, powered by pre-evacuation of its PDMS substrate, 24,25 this spotter chip does not require any external pump, connections, or tubing to dispense or spot probe solutions. Unlike contact and non-contact printing, this spotter system is insensitive to the specific fluid properties, thus reliably producing precise, uniform microarrays.…”