A Method of Quick and Safe Coal Uncovering by Hydraulic Fracturing in a Multibranch Radial Hole with a Coalbed Methane Well

Abstract

Coal and gas outburst accidents occur most frequently during coal uncovering operation, and uncovering-induced outburst accidents have caused great economic losses and casualties. In order to quickly and safely uncover the outburst coal seam at the air intake shaft in panel 2, Zhaozhuang Coal Mine has come up with the technology of multibranch radial borehole hydraulic fracturing (MRBHF) coal uncovering technology in the surface coalbed methane (CBM) well. By conducting fracturing of constructed radial boreholes in the CBM well, the technology increases fractures, enhancing coal permeability and raising gas drainage volume in the uncovering area. It brings the following three major benefits: (1) uncovering coal efficiently, rapidly, and safely; (2) greatly reducing engineering quantity, coal uncovering period, and construction cost, i.e., significantly improving the economic benefits; and (3) efficiently reusing the CBM well. Compared with conventional uncovering measures, the proposed technology shortens the uncovering period by 118 d, enhances the coal seam permeability by 3.55 times, raises the gas drainage rate by 22%, increases the gas drainage volume by 1.93 times, and reduces the engineering volume of drilling by 12,000 m. The safe, rapid, economical, and applicable technology provides scientific guidance and reference for domestic and foreign shaft coal uncovering engineering and possesses important economic and social values and application prospect for safe and efficient production of coal mines.

Advances in Liquid Nitrogen Fracturing for Unconventional Oil and Gas Development: A Review

“…Since 1971, researchers have continuously developed and optimized the LN 2 fracturing process, including examining the factors influencing LN 2 fracturing and proposing a series of techniques to reduce reflectance. − There are five main categories of LN 2 fracturing processes: cyclic injection of low- and high-temperature fluids, repeated LN 2 fracturing, LN 2 gas fracturing, LN 2 -assisted fracturing, and LN 2 jet fracturing.…”

Advanced Technology of Drilling and Hydraulic Loosening in Coal Bed Methane Using a Cavitation Hydrovibrator – Experience and Prospects

“…the technology increases fractures, enhancing coal permeability and raising gas drainage volume in the uncovering area.) [4].…”

Influence of Proppant Size on the Proppant Embedment Depth

“…Hydraulic fracturing is a technique used to stimulate the production of hydrocarbons or other resources, such as geothermal energy, after a wellbore has been drilled. − Proppants are carried by the fracturing fluid into the newly formed fractures to keep them open after the pressure is released and allow hydrocarbons that were trapped in the rock to flow through the fractures more efficiently . However, some mechanisms can lead to the reduction of fracture conductivity, such as fine migration, proppant diagenesis, proppant crushing, − and proppant embedment, , which is defined as proppant particles being embedded into the rock mass under pressure, causing a reduction in the fracture width and conductivity .…”