A Co-Nanoparticles Modified Electrode for On-Site and Rapid Phosphate Detection in Hydroponic Solutions

Abstract

Conventional strategies for determining phosphate concentration is limited in efficiency due to the cost, time, and labor that is required in laboratory analysis. Therefore, an on-site and rapid detection sensor for phosphate is urgently needed to characterize phosphate variability in a hydroponic system. Cobalt (Co) is a highly sensitive metal that has shown a selectivity towards phosphate to a certain extent. A disposable phosphate sensor based on the screen-printed electrode (SPE) was developed to exploit the advantages of Co-nanoparticles. A support vector machine regression model was established to predict the concentration of phosphate in the hydroponic solutions. The results showed that Co-nanoparticles improve the detection limit of the sensor in the initial state. Meanwhile, the corrosion of Co-nanoparticles leads to a serious time-drift and instability of the electrodes. On the other hand, the coefficient of variation of the disposable phosphate detection chip is 0.4992%, the sensitivity is 33 mV/decade, and the linear range is 10−1–10−4.56 mol/L. The R2 and mean square error of the buffer-free sensor in the hydroponic solution are 0.9792 and 0.4936, respectively. In summary, the SPE modified by the Co-nanoparticles is a promising low-cost sensor for on-site and rapid measurement of the phosphate concentration in hydroponic solutions.

Review—Solid State Sensors for Phosphate Detection in Environmental and Medical Diagnostics

“…37 Multiple cobalt-based electrodes were reported in last two decades due to their simple fabrication process, good selectivity, and long-term electrochemical stability. 37,43,45,46,50,51 The electrode responds to all three orthophosphate species present in the water: dihydrogen phosphate, monohydrogen phosphate and phosphate ions. 51 The first cobalt electrode was fabricated using a cobalt wire.…”

Some Emerging Opportunities of Nanotechnology Development for Soilless and Microgreen Farming

“…In terms of sensing applications in soilless farming systems, nano-sensing R&D focuses on detecting and quantifying the amount of supplemental nutrients to ensure the availability of the interested nutrient throughout the cultivation process. Xu et al developed a disposable phosphate sensor using a screen-printed electrode (SPE) modified with cobalt nanoparticles [115]. The results showed that cobalt nanoparticles improve the sensor's detection limit in the initial state.…”

Nanomaterials for electrochemical detection of pollutants in water: A review

“…For phosphate detection, cobalt (Co)—a highly sensitive metal—has gained a lot of attention since the cobalt oxide (CoO) group has demonstrated good selectivity toward different phosphate species such as PO 4 3– , HPO 4 2– , and H 2 PO 4– [ 32 ]. Pang et al.…”