A Calibration Procedure for Field and UAV-Based Uncooled Thermal Infrared Instruments

Abstract

Thermal infrared cameras provide unique information on surface temperature that can benefit a range of environmental, industrial and agricultural applications. However, the use of uncooled thermal cameras for field and unmanned aerial vehicle (UAV) based data collection is often hampered by vignette effects, sensor drift, ambient temperature influences and measurement bias. Here, we develop and apply an ambient temperature-dependent radiometric calibration function that is evaluated against three thermal infrared sensors (Apogee SI-11(Apogee Electronics, Santa Monica, CA, USA), FLIR A655sc (FLIR Systems, Wilsonville, OR, USA), TeAx 640 (TeAx Technology, Wilnsdorf, Germany)). Upon calibration, all systems demonstrated significant improvement in measured surface temperatures when compared against a temperature modulated black body target. The laboratory calibration process used a series of calibrated resistance temperature detectors to measure the temperature of a black body at different ambient temperatures to derive calibration equations for the thermal data acquired by the three sensors. As a point-collecting device, the Apogee sensor was corrected for sensor bias and ambient temperature influences. For the 2D thermal cameras, each pixel was calibrated independently, with results showing that measurement bias and vignette effects were greatly reduced for the FLIR A655sc (from a root mean squared error (RMSE) of 6.219 to 0.815 degrees Celsius (℃)) and TeAx 640 (from an RMSE of 3.438 to 1.013 ℃) cameras. This relatively straightforward approach for the radiometric calibration of infrared thermal sensors can enable more accurate surface temperature retrievals to support field and UAV-based data collection efforts.

Scaling Effects on Chlorophyll Content Estimations with RGB Camera Mounted on a UAV Platform Using Machine-Learning Methods

“…Moreover, it is very destructive and time-consuming to acquire the data for a large area. The SM method is a natural laboratory that simulates the whole growing process of crops covering the status of all variables of crops such as chlorophyll content, but this method relies on the high resolution of input data such as weather, soil, management practice that are difficult to obtain [ 20 , 21 , 22 ]. Alternatively, RS has been successfully applied in many related fields such as image classification and change detection.…”

Modified Red Blue Vegetation Index for Chlorophyll Estimation and Yield Prediction of Maize from Visible Images Captured by UAV

“…The VI can be seen as the indicator for monitoring the growing conditions, and the precisely confirmed models can be adopted for scale-up estimations. As the state of the art, the unmanned aerial vehicle (UAV) is now widely used for data collection in agricultural- and ecological-related applications, and it can be quickly deployed for acquiring images when needed compared with traditional satellite remote sensing (SRS) [ 30 , 31 , 32 , 33 , 34 ]. The high temporal and spatial images from UAV platforms are better for analysis as the data are not much influenced by the cloud [ 35 , 36 , 37 ].…”

Design a smart infrastructure monitoring system: a response in the age of COVID-19 pandemic

“…An example is an error of around 0.2 °C when the emissivity is equal to 0.98, and the average radiant temperature is 10 °C higher or lower than the outdoor temperature. Simultaneously, simple calibration cannot be corrected, depending on room temperature or even if the room temperature remains stable [ 33 , 34 ]. The application of a reference objective can reduce and offset influence accordingly.…”