3‐D photonic bandgap structures in the microwave regime by fused deposition of multimaterials

Pilleux, M.E.; Safari, A.; Allahverdi, M.; You-ren, Chen; Lu, Yicheng; Jafari, Mohsen A.

doi:10.1108/13552540210413301

Cited by 20 publications

(7 citation statements)

References 20 publications

(22 reference statements)

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Despite this, thanks to the successful development of this technology and material science, the mechanical properties of parts obtained by FDM are now comparable with other processing routes [ 111 ]. This is why the application of FDM for ceramic production is successfully expanding into various fields as electronic components [ 112 ], biological parts [ 113 ], sensors [ 114 ], bioceramic scaffolds [ 115 ], and others [ 116 , 117 ].…”

Section: Additive Manufacturing Processes For Ceramic and Their Prmentioning

confidence: 99%

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

et al. 2020

View full text Add to dashboard Cite

In the present work, the state of the art of the most common additive manufacturing (AM) technologies used for the manufacturing of complex shape structures of graphene-based ceramic nanocomposites, ceramic and graphene-based parts is explained. A brief overview of the AM processes for ceramic, which are grouped by the type of feedstock used in each technology, is presented. The main technical factors that affect the quality of the final product were reviewed. The AM processes used for 3D printing of graphene-based materials are described in more detail; moreover, some studies in a wide range of applications related to these AM techniques are cited. Furthermore, different feedstock formulations and their corresponding rheological behavior were explained. Additionally, the most important works about the fabrication of composites using graphene-based ceramic pastes by Direct Ink Writing (DIW) are disclosed in detail and illustrated with representative examples. Various examples of the most relevant approaches for the manufacturing of graphene-based ceramic nanocomposites by DIW are provided.

show abstract

Section: Additive Manufacturing Processes For Ceramic and Their Prmentioning

confidence: 99%

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

et al. 2020

View full text Add to dashboard Cite

show abstract

“…Despite this, thanks to the successful development of this technology and material science, the mechanical properties of parts obtained by FDM are now comparable with other processing routes [137]. This is why the application of FDM for ceramic production is successfully expanding into various fields as electronic components [138], biological parts [139], sensors [140], bioceramic scaffolds [141][142][143][144][145], and others [146,147].…”

Section: Fused Deposition Modeling (Fdm)mentioning

confidence: 99%

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Pinargote

Smirnov

Peretyagin

et al. 2020

Preprint

View full text Add to dashboard Cite

In the present work, the state of the art of the most common additive manufacturing (AM) technologies used for the manufacturing of complex shape structures of graphene-based ceramic nanocomposites, ceramic and graphene-based parts is explained. A brief overview of the AM processes for ceramic, which are grouped by the type of feedstock used in each technology, is presented. The main technical factors that affect the quality of the final product were reviewed. The AM processes used for 3D printing of graphene-based materials are described in more detail; moreover, some studies in a wide range of applications related to these AM techniques are cited. Furthermore, different feedstock formulations and their corresponding rheological behaviour were explained. Additionally, the most important works about the fabrication of composites using graphene-based ceramic pastes by Direct Ink Writing (DIW) are disclosed in detail and illustrated with representative examples. Various examples of the most relevant approaches for the manufacturing of graphene-based ceramic nanocomposites by DIW are provided.

show abstract

“…The concept of multi-material printing with FFF was first practiced at Rutgers University to produce ceramic components consisting of maximum four materials (Brennan et al, 2003). The research group has faced many problems working on ceramic materials while co-firing of two or more materials was complex and difficult to control (Pilleux et al, 2002). Recently, multi-material lightweight vehicle strategy is brought into practice by major automotive companies such as Ford and Magna, which has the feasibility of 25 per cent weight savings and 15-20 per cent increase in mileage (Needes, 2016).…”

Section: Introductionmentioning

confidence: 99%

Mechanical feasibility of ABS/HIPS-based multi-material structures primed by low-cost polymer printer

Singh

Gupta

et al. 2019

RPJ

View full text Add to dashboard Cite

Purpose The purpose of this paper is to fabricate acrylonitrile-butadiene-styrene (ABS)/high impact polystyrene (HIPS) based multi-material geometries using a low cost polymer printer. At the same time, efforts have been made to investigate the mechanical characteristics of the obtained prints and to perform the optimization using the Taguchi-Grey (TGRA) method. Design/methodology/approach Initially, the feedstock materials were in-house fabricated in the form of filament wires, workable with fused filament fabrication (FFF) technique, of 1.75 ± 0.1 mm diameter by using a single screw extruder. Multi-material structures were fabricated using variable parameters (such as: raster angles, layer height, fill density and solid layers) and the experimentation was conducted as per Taguchi L18 array. Mechanical responses obtained by performing tensile, impact and bending test were studied in response to input variables and ultimately optimized settings were obtained, for individual as well as multiple parameters). Scanning electron microscopy (SEM) analysis was performed to analyze the fractured surfaces. Findings The Signal/Noise (S/N) plots for the quality characteristics highlighted that selected input parameters significantly influenced the obtained values for tensile strength, impact strength and flexural strength. Micrographs of the fractured specimens showed the occurrence of brittle fracture with higher levels of perimeter, infill density and solid layers. The extent of delamination was also increased under the bending load and further increased by increasing solid layers. Practical implications The results of the study strongly advocated the utility of fabricated multi-materials structures in automotive, aerospace and other manufacturing industries. Originality/value This work represents the fabrication, testing and analysis of polymer-based multi-material structures for engineering applications.

show abstract

3‐D photonic bandgap structures in the microwave regime by fused deposition of multimaterials

Cited by 20 publications

References 20 publications

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Mechanical feasibility of ABS/HIPS-based multi-material structures primed by low-cost polymer printer

Contact Info

Product

Resources

About