A field-deployed surface plasmon resonance (SPR) sensor for RDX quantification in environmental waters

Abstract

A field-deployable surface plasmon resonance (SPR) sensor is reported for the detection of the energetic material (commonly termed explosives) 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) at ppb concentration in environmental samples. The SPR sensor was first validated under laboratory conditions with uncontaminated natural water samples spiked with known concentrations of RDX near the EPA limit of 2 ppb, which was then applied to monitor environmental samples collected in different downgradient wells near a grenade training range. The SPR sensor was finally tested on the field, where environmental samples were analysed on location in less than 90 minutes per well, which included the time to setup the equipment, sample the well and analyse the sample. The SPR analysis time was less than 45 minutes for equilibration, recalibration and measuring the water sample. Results obtained with the SPR sensors were cross-validated with the standard HPLC method (EPA method 8330b), and they showed good agreement with an accuracy within less than 1.6 ppb for analysis at the sampling sites, and with the relative standard deviation (RSD) better than 20% for field and laboratory measurements. The SPR sensor worked in a range of environmental conditions, including operation from about 0 °C to nearly 30 °C. The instrument was easily deployed near the sampling site using motor vehicles under summer conditions (Lab-in-a-Jeep) and using a sled under winter conditions (Lab-on-a-sled), showcasing the field deployability of the RDX SPR sensor and the possibility of continuously monitoring RDX in the environment.

Surface Plasmon Resonance: Material and Interface Design for Universal Accessibility

“…While SPIRIT carries the advantages of integrated syringe injectors and a contained power source, both the NanoSPR and P4SPR are easily connected to automatic or manual sample injectors, and the P4SPR may be powered via USB through a laptop computer. 19…”

“…For example, while clinical diagnostics have been the primary highlight, less explored matrices have included food and environmental samples. 9,19,152–154 Although food-based samples represent an extremely complex matrix, there are very few reports of ultralow fouling surfaces specifically designed for this purpose. 152–154 Vaisocherová-Lisalová et al propose the use of a rationally designed copolymer brush that exhibited high fouling resistance against various food matrices, and the authors showed that this resistance remained consistent even after functionalization with a biorecognition element.…”

Drug-Based Gold Nanoparticles Overgrowth for Enhanced SPR Biosensing of Doxycycline

“…Till now, this technique has been primarily used as an effective tool for biomolecular interaction analysis, but more recently, clinical analysis is increasingly reported [19]. SPR sensing proceeds without altering or damaging the composition of original analyte [20] and is increasingly proposed for clinical diagnostics [21,22], drug monitoring [23], environmental monitoring [24,25], food analysis [26,27], and biochemistry [28].…”

Development and Validation of HPLC Method for DAAF and its Applications in Quality Control and Environmental Monitoring

“…Analytical method of identification and quantification is one of very important topic of energetic materials during their researching and developing process . The determination of energetic materials has many benefits in many areas including quality control for the synthesis, environmental protection around the factory, and the prevention of terrorist attacks in public security . Although DAAF is being synthesized and widely investigated about its potential applications , there is a few reports about the quantitative analysis of DAAF.…”