Snapshot depth sensitive Raman spectroscopy in layered tissues

Abstract

Depth sensitive Raman spectroscopy has been shown effective in the detection of depth dependent Raman spectra in layered tissues. However, the current techniques for depth sensitive Raman measurements based on fiber-optic probes suffer from poor depth resolution and significant variation in probe-sample contact. In contrast, those lens based techniques either require the change in objective-sample distance or suffer from slow spectral acquisition. We report a snapshot depth-sensitive Raman technique based on an axicon lens and a ring-to-line fiber assembly to simultaneously acquire Raman signals emitted from five different depths in the non-contact manner without moving any component. A numerical tool was developed to simulate ray tracing and optimize the snapshot depth sensitive setup to achieve the tradeoff between signal collection efficiency and depth resolution for Raman measurements in the skin. Moreover, the snapshot system was demonstrated to be able to acquire depth sensitive Raman spectra from not only transparent and turbid skin phantoms but also from ex vivo pork tissues and in vivo human thumbnails when the excitation laser power was limited to the maximum permissible exposure for human skin. The results suggest the great potential of snapshot depth sensitive Raman spectroscopy in the characterization of the skin and other layered tissues in the clinical setting or other similar applications such as quality monitoring of tablets and capsules in pharmaceutical industry requiring the rapid measurement of depth dependent Raman spectra.

High spatial resolution dosimetry with uncertainty analysis using Raman micro‐spectroscopy readout of radiochromic films

“…For applications such as experimental microdosimetry 10 that require a smaller spatial resolution of ~1 µm, a single mode laser and a microscope objective with a larger numerical aperture (NA), along with a point‐by‐point mapping could be used in the setup to achieve this higher resolution. The advantageous feature of the longer depth of focus of ~34 µm for concurrent accumulation of the Raman signal from the polyester laminate, can still be retained in the high (1 µm) spatial resolution setup, by implementing an approach based on, for example, depth‐sensitive Raman spectroscopy 42 …”

Raman Spectroscopy in Skeletal Tissue Disorders and Tissue Engineering: Present and Prospective

“…These technical limitations can lead to a simple qualitative sampling with a significant cross-talk among different layers. 20 In the Coherent RS technique, the difference due a vibrational mode frequency generated by two light sources (referred as pump and Stokes beam) results in the acquisition of signal for a specific molecular bond of interest. The coherent addition of the Raman signal from different molecules improves the signal compared to spontaneous Raman, typically by up to ~10 5 .…”

Tissue Phantoms for Biomedical Applications in Raman Spectroscopy: A Review

“…The system was evaluated on the basis of its ability to acquire signals from different depths of tissue phantoms, as well as ex vivo animal and in vivo human (fingernail) tissue. 68 Multimodality skin tissue phantoms have also been employed in studies to demonstrate the effectiveness of combined system approaches, such as in the case of a photo-acoustic Raman probe. 69 The multi-layer agarose phantom employed in the study, contained Intralipid and nigrosin dye to simulate skin tissue with a malignant tumor, represented by a trans -stilbene inclusion.…”