Biocomposites reinforced with natural fibers:thermal, morphological and mechanical characterization

Abstract

This study evaluates the thermal, morphological and mechanical behavior of polypropylene (PP) composite with different natural fibers. The fibers used were wood, sugarcane, bamboo, babassu, coconut and kenaf with and without coupling agent. The thermal, morphological and mechanical properties were evaluated, and a composite PP+GFPP (glass fiber) was used as reference. The interaction at the interface fiber-polymer matrix was studied by scanning electron microscopy (SEM) at the fractured surface of the composites, as expected the presence of maleic anhydride (MA) as coupling agent increasedthe interaction at the interface. The influence of natural fiber in the degree of crystallinity of the composites was evaluated by DSC analysis. The samples of PP+GFPP and PP+(PP-MA)+WF (wood flour) showed better temperature stability. PP+GF also presented superior flexural modulus. The thermal dynamic mechanical behavior was evaluated by DMA, a decrease in storage modulus with increasing temperature was observed, the PP+GF and the composite containing maleic anhydride and sugarcane fiber showed higher modulus. The natural fiber biocomposites studied, consistently presented lower flexural modulus and tensile strength than the reference composite, with and without the use of coupling agent. As expected the use of natural fibers lowered the density compared to the reference material.

Potential use of waste from tree pruning and recovered plastic to obtain a building material: Case study of Merida, Mexico

“…This happens because the degree of reinforcement provided by the glass fibres for these two thermosetting polymer matrices is much greater than that offered by ground wood chips for thermoplastic polymer matrices. This has been widely reported in other works and in the references cited therein, for instance Lemos et al (2017), Madsen and Gamstedt (2013), Rizvi and Semeralul (2008) and Zolfaghari et al (2015). In their study, Lemos et.…”

Estudo Dos Parâmetros Na Soldagem Por Resistência Elétrica De Compósito Pei/Fibra De Vidro Por Planejamento Experimental

“…Grupo 2 (PP+Luffa) (SANJAY et al, 2018;LEMOS et al, 2017;;DEMIR et al, 2006) -Não foi encontrado na literatura trabalho de processamento por extrusão de compósito de polipropileno com Luffa cilíndrica; tampouco trabalho com o teor utilizado carga/ matriz.…”

Potential Application of Peppermint (Mentha piperita L.), German Chamomile (Matricaria chamomilla L.) and Yarrow (Achillea millefolium L.) as Active Fillers in Natural Rubber Biocomposites

“…The most popular biocomposites with the addition of natural fiber are composites filled with wood, wood flour and other lignocellulosic fillers such as hemp, jute, bamboo, straw, horsetail, etc. [ 20 , 21 , 22 , 23 ]. These types of materials are favorable compared to the products with synthetic fibers due to their eco-friendly nature, low energy expenditure, low health risk and low emission of toxic vapors during processing, cheaper production and processing flexibility [ 24 ].…”