A simple theory for vibration of MRI gradient coils

Abstract

Vibrations of a string can provide a model for vibrations of MRI coil assemblies. The string model for the vibrations of MRI coils is presented, and compared with experimental results. Gradient coils exhibit resonant modes because of the finite coil length, l, and the elasticity of materials that comprise the assembly. The resonance frequencies depend on l and the Young modulus, as well as on the current distribution. Under longitudinal gradient pulses, anti-symmetrical modes of surface vibration are produced due to the symmetry of current distribution. In contrast, transverse gradient pulses produce coil bending that results in symmetrical vibration modes of the coil axis. The viscosity of the assembly materials controls the width of the vibrational resonance modes. Experimental results are in agreement with this simple string model.

Design, Realization and Experiments with a new RF Head Probe Coil for Human Vocal Tract Imaging in an NMR device

“…This noise has a mechanical character, and can be processed in spectral domain [13] -see spectrograms obtained from phonation of the long vowel "a:" during MR scan in Fig.11. For noise reduction, we used the method based on the cepstral speech model [14].…”

The suppression of selected acoustic frequencies in MRI

“…The present paper contains the details and elaborates upon a previous preliminary report [13,14]. In fact, a string approximation has been put forth as a useful model for the dominant frequencies of both longitudinal and transverse gradient coils [15]. The gradient vibrational modes yield a rich spectrum of frequencies (leading to a frequency response over a range of several kHz).…”

Two Methods of Automatic Evaluation of Speech Signal Enhancement Recorded in the Open-Air MRI Environment

“…The MRI equipment consists of a gradient coil system producing three orthogonal linear magnetic fields for spatial scanning. The function of these gradient coils is accompanied by an acoustic noise due to rapidly changing Lorentz forces during fast switching inside the weak static field environment [4]. The speech signal recorded under such conditions may be analyzed only if the adequate signal-to-noise ratio is achieved [5].…”