Development of Adsorbent Materials Using Residue from Coffee Industry and Application in Food dye Adsorption Processes

Abstract

The aim of this study was to develop an adsorbent from coffee husk, residue from the coffee industry by different activation methods and to evaluate its application in the treatment of effluent containing synthetic Ponceau 4R dye. The activations were with phosphoric acid and zinc chloride, then the samples were characterized in terms of physical and chemical composition, structure and morphology, thermal behavior and kinetic and thermodynamic study. Regarding the characterization of the material, the activation with phosphoric acid showed porous morphology and a high surface area (429.7 m² g -1 ) and with the kinetic study it was possible to obtain an equilibrium time of 60 min and dispersion according to Elovich kinetics (R 2 = 0.96 and RMSE < 0.24). According to the experimental design, the adsorptive capacity can be evaluated with the significant result (qe = 19.87 mg g -1 ) under the conditions of 90 min of the adsorption process and at the concentration of 2 g L -1 of adsorbent. In relation to the equilibrium study the Langmuir model fit the data with coefficient of determination of R 2 = 0.84. Finally, the Ponceau 4R dye adsorption process using coffee husks as an activated carbon was thermodynamically favorable through the negative Gibbs free energy and positive entropy (+0.022 kJ mol -1 K -1 ). Therefore, the use of coffee husk as activated carbon proved to be a favorable material for Ponceau 4R dye adsorption. HIGHLIGHTS• The adsorbent activated with H2PO4 removed around 100% of Ponceau 4R dye.• The increase in temperature influenced the increase in maximum adsorptive capacity.• Langmuir's isotherm was better suited to the experimental data of the Ponceau 4R dye.

Structure Characterization and Dye Adsorption Properties of Modified Fiber from Wheat Bran

“…Based on the adsorption isotherm data, the thermodynamic parameters such as enthalpy change (∆H • ), entropy change (∆S • ), and Gibbs free energy change (∆G • ) of the adsorption of Congo red dye by the modified XW 45 wheat bran fiber could be calculated. The calculation process mainly referred to the following equations [39]:…”

Adsorbents for the purification and recovery of biocompounds: An updated review

“…The amount adsorbed reflects the adsorption capacity of the adsorbent on particular operating parameters. 119 Different kinetic models can describe the adsorption process. Al-Ghouti and Da'ana 32 report that it is possible to find more than 25 of these models in the literature, each based on theoretical and experimental considerations.…”

“…The period required to reach this state is called the equilibrium time. The amount adsorbed reflects the adsorption capacity of the adsorbent on particular operating parameters 119 …”

Detoxification of furanic aldehydes of the hemicellulosic hydrothermal hydrolysate of brewers’ spent grains by continuous adsorption on a fixed‐bed column

“…In addition to AC, various adsorbent materials have strong potential for the extraction, separation, and purification of components in an aqueous phase. These materials have chemical and structural properties that may favor the removal of highly toxic organic components 35,36 …”

“…These materials have chemical and structural properties that may favor the removal of highly toxic organic components. 35,36 Silica-based adsorbents are widely used for cleaning aqueous solutions in solid-phase extraction. 37 Silica modified with octadecyl groups improves the material's polarity in the extraction and separation of polar components.…”