Fig. 1 Elements of the torque transducer and the magnetic parameters concerning with ring type torque sensor by using inverse magnetostriction. (H T =Magnetization strength, M r =Residual magnetization, s=Applied stress) Galfenol (FeGaAlZrC) alloy ring was used for torque sensing by detecting a leakage flux from the ring surface based on the inverse magnetostriction effect. This leakage flux changes depending on the magnetic parameter such as magnetostrictive strain (l), residual magnetization (M r ), applied or residual stresses(s) of the ring. Beside, the hoop stress (s h )which is one of the residual stress factor in the ring also has strong effect on torque sensing because this affects those magnetic parameters. The fitting gap between ring and shaft was four kinds of 6, 10, 20 and 30 mm and hoop stress (s h ) in each case can be estimated from the elastic formula of material mechanics. As a result, torque sensitivity showed the maximum value in the case of 10 micrometers gap and it decreased toward the gaps of 10 and 20 mm and drastically decreased in the case of minimum gap of 6 mm. This change of torque sensitivity depending fitting gap is discussed based on the magnetic domain mobility and inelastic material effect at the interface of Galfenol ring and rotating shaft.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.