The China Spallation Neutron Source (CSNS) is a large scientific facility with the main purpose of serving multidisciplinary research on material characterization using neutron scattering techniques. The accelerator system is to provide a proton beam of 120 kW with a repetition rate of 25 Hz initially (CSNS-I), progressively upgradeable to 240 kW (CSNS-II) and 500 kW (CSNS-II'). In addition to serving as a driving source for the spallation target, the proton beam can be exploited for serving additional functions both in fundamental and applied research. The expanded scientific application based on pulsed muons and fast neutrons is especially attractive in the overall consideration of CSNS upgrade options. A second target station that houses a muon-generating target and a fast-neutron-generating target in tandem, intercepting and removing a small part of the proton beam for the spallation target, is proposed. The muon and white neutron sources are operated principally in parasitic mode, leaving the main part of the beam directed to the spallation target. However, it is also possible to deliver the proton beam to the second target station in a dedicated mode for some special applications. Within the dual target configuration, the thin muon target placed upstream of the fast-neutron target will consume only about 5% of the beam traversed; the majority of the beam is used for fast-neutron production. A proton beam with a beam power of about 60 kW, an energy of 1.6 GeV and a repetition rate of 12.5 Hz will make the muon source and the white neutron source very attractive to multidisciplinary researchers.
In this paper, we report the design and simulation of a wire scanner for the linac of the CSNS (China Spallation Neutron Source). The wire scanner is used to measure the transverse beam profile and the emittance. The effect of beam energy change upon the mechanical design of the wire scanner must be considered. The simulation results of heat on the two specified wires, tungsten and carbon, by using the finite element method software, ANSYS, are presented. In addition, the effect of wire deformation on the beam profile measurement is qualitatively analyzed, and the signal level of the wire scanner is discussed.
To develop the high power proton linear accelerator for the Accelerator Driven System (ADS) program, the preliminary design of the Pi mode accelerating structure (PIMS) has been carried out. It is estimated that PIMS would heat up to 80 °C for low duty cycle (0.1%) without water-cooling, which is not acceptable, thus water-cooling is demanded. The structure stability for the high duty cycle or even for CW operation is crucially important for the ADS application. Therefore, thermal analysis with water-cooling for a high duty accelerator in our ADS research is performed to control the frequency shift caused by a temperature rise.
The China Spallation Neutron Source (CSNS) drift tube linac (DTL) consists of four tanks and each tank is fed by a 2.5 MW klystron. Accurate predication of RF coupling between the RF cavity and ports is very important for DTL RF coupler design. An iris-type coupler is chosen to couple the RF power to the DTL accelerating cavity. The physical design of the DTL coupler and the calculations of RF coupling between the cavity and coupler are carried out. The results from the numerical simulations are in excellent agreement with the analytical results.
In the conventional design of RF linacs, the bunched beams are not in thermal equilibrium. The space charge forces couple the particle motions between the transverse and the longitudinal directions. Furthermore it will cause the equipartitioning process which leads to emittance growth and halo formation. In the design of the China Spallation Neutron Source (CSNS) linac, three cases are investigated using the Hofmann stability charts. In this paper, we present the equipartitioning beam study of the CSNS Alvarez DTL linac.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.