IntroductionLight olefins are important basic raw materials for the petrochemical industry, and demand for light olefins such as ethylene and propylene has been increasing every year 1),2) . Light olefins have been mainly produced by thermal cracking of naphtha, which gives yields of ethylene and propylene of approximately 25 % and 13 %, respectively 3)~5) . However, the naphtha cracking process consumes more than 30 % of the total amount of energy required in petrochemical production, so more efficient processes for the production of light olefins are highly desirable. Moreover, the relative demand for propylene has increased due to the large-scale production of ethylene in the Middle East and China. Catalytic cracking of naphtha over solid-acid catalysts can provide a high propylene/ethylene ratio at low reaction temperatures compared with thermal cracking 6) , so use of this process could provide energy savings together with the selective production of propylene. Accordingly, the catalytic cracking of naphtha is expected to be an effective alternative to the thermal cracking process.Promising catalysts for n-hexane cracking include the zeolites, which are crystalline aluminosilicate materials with various properties, such as strong acidity and high surface area, and catalytic cracking of alkane over zeolite catalysts has been investigated 7)~9) . Zeolites incorporate intracrystalline micropores and nanospaces close to the molecular diameters of light hydrocarbons, so have remarkable molecular-sieving effects for light hydrocarbons and have been widely used as shapeselective catalysts in various hydrocarbon processes, such as the alkylation of aromatics 10),11) and synthesis of olefins from alcohol and acetone 12),13) . However, the crystal sizes of zeolites are usually much larger than the sizes of the micropores, so the rate-limiting step of the reaction tends to be diffusion of the reactant/product molecules within the micropores. Moreover, carbon solid (coke) readily forms near the external surface of the crystal under diffusion-controlled conditions, resulting in rapid blocking of the pores, leading to a short catalyst lifetime. Nano-sized zeolites are effective to achieve low diffusion resistance, because the diffusion length for reactant/product hydrocarbons, which depends on the zeolite crystal size, is reduced.We have successfully prepared MFI-type and MORtype zeolite nanocrystals via hydrothermal synthesis in a water/surfactant/organic solvent (emulsion method) 14)~18) . The nano-sized zeolites are expected to be effective catalysts with low diffusion resistance as well as large external surface area, which will improve the catalytic activity and lifetime. In the present study, catalytic cracking of n-hexane, as a model reaction for the catalytic cracking of naphtha, was examined over MFI-type zeolites, and the effects of the Si/Al ratio and 267 Journal of the Japan Petroleum Institute, 55, (4), 267-274 (2012) J. Jpn. Petrol. Inst., Vol. 55, No. 4, 2012 To whom correspondence should be addresse...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.