В статье представлены результаты исследования процесса быстрого пиролиза отходов льнопереработки в присутствии катализатора ZSM-5 импрегнированного переходными металлами и металлами платиновой группы. В присутствии металлсодержащих цеолитных катализаторов повышается содержание метана, этилена, водорода и углекислого газа в составе пиролизного газа, что связано с крекингом летучих продуктов, проходящих через слой нагретого катализатора. Катализатор 2% CoZSM-5 показал высокую активность в процессе деоксигенирования поскольку его применение приводило к увеличению низшей объемной теплоты сгорания получаемого газа в 1,3-1,5 раз, а также к снижению содержания смол до 0,01 % (масс.). The article presents the results of a study of the process of rapid pyrolysis of flax processing waste in the presence of a ZSM-5 catalyst impregnated with transition metals and platinum group metals. In the presence of metal-containing zeolite catalysts, the content of methane, ethylene, hydrogen, and carbon dioxide in the composition of the pyrolysis gas increases, which is associated with the cracking of volatile products passing through the heated catalyst bed. The 2%CoZSM-5 catalyst showed high activity in the deoxygenation process, since its use led to an increase in the net volumetric calorific value of the resulting gas by 1.3-1.5 times, as well as to a decrease in the resin content to 0.01% (wt.).
В данной работе приводятся результаты исследования кинетики реакции гидрогенолиза глюкозы до этилен- и пропиленгликоля - как части общего процесса каталитической трансформации целлюлозы в гликоли в присутствии Ru-содержащих гетерогенных катализаторов. В качестве последнего в работе был использован разработанный ранее катализатор на полимерной основе 3 % Ru-FeO/СПС, обладающий магнитными свойствами. В ходе исследования получено формальное описание кинетики гидрогенолиза глюкозы, предложена математическая модель реакции гидрогенолиза глюкозы до гликолей в присутствии синтезированного катализатора, произведена оценка параметров математической модели. This paper presents the results of studying the kinetics of the hydrogenolysis reaction of glucose to ethylene and propylene glycol as part of the overall catalytic transformation of cellulose into glycols in the presence of Ru-containing heterogeneous catalysts. As the latter, we used a previously developed polymer-based catalyst 3% Ru-FeO/HPS, which has magnetic properties. In the course of the study, a formal description of the kinetics of glucose hydrogenolysis was obtained, a mathematical model of the reaction of glucose hydrogenolysis to glycols in the presence of a synthesized catalyst was proposed, and the parameters of the mathematical model were estimated.
Данная работа посвящена изучению кинетики процесса каталитического пиролиза кубовых остатков нефти. Исследование проводилось методом термогравиметрии с различной скоростью нагрева образца (2,5; 5 и 10 К/мин). В качестве катализаторы была использована синтезированная каталитическая система: ZSM-5/бентонитовая глина с импрегнированным металлом (Со - 2 % масс.). При моделировании были определены формальные кинетические параметры Аррениуса процесса деструкции. Рассчитанная модель представляет собой двухстадийный параллельный процесс. Значения энергий активации деструкции для первой стадии составило 58 кДж/моль и 188 кДж/моль для второй. This work is devoted to the study of the kinetics of the process of catalytic pyrolysis of oil residues. The study was performed by thermogravimetry with different sample heating rates (2.5, 5, and 10 K / min). A synthesized catalytic system was used as a catalyst: ZSM-5 / bentonite clay with impregnated metal (Co-2% wt.). Formal kinetic parameters of the Arrhenius of the destruction process were determined During modeling. The calculated model is a two-stage parallel process. The destruction activation energies for the first stage were 58 kJ/mol and 188 kJ/mol for the second stage.
В данной работе представлено исследование кинетики процесса термодеструкции полимеров. Процесс пиролиза полиэтилена высокого давления и сшитого полиэтилена изучался методом термогравиметрии. Для определения кинетической модели деструкции и параметров Аррениуса разложение образцов проводилось с различной скоростью нагрева (2,5; 5 и 10 К/мин). В ходе моделирования процесса пиролиза была определена наиболее адекватная модель: термодеструкция включает две последовательные стадии с автокатализом на первой стадии. Энергии активации деструкции полиэтилена составили 111 и 91 кДж/моль для первой и второй стадии соответственно. В случае сшитого полиэтилена - 175 и 308 кДж/моль. This paper presents a study of the kinetics of the process of thermal degradation of polymers. The pyrolysis process of high-pressure polyethylene and cross-linked polyethylene was studied by thermogravimetry. To determine the kinetic model of destruction and Arrhenius parameters, the samples were decomposed at different heating rates (2.5, 5, and 10 K / min). During the simulation of the pyrolysis process, the most adequate model was determined: thermal degradation includes two consecutive stages with autocatalysis at the first stage. The activation energies of polyethylene degradation were 111 and 91 kJ/mol for the first and second stages, respectively. In the case of cross-linked polyethylene - 175 and 308 kJ/mol.
Пиролиз лигноцеллюлозного сырья в ценные продукты является перспективным направлением для переработки отходов деревообрабатывающей промышленности и для получения энергоносителей. Поиск катализаторов, обеспечивающих максимальный выход и теплоценность получаемых продуктов, - это актуальный вопрос в развитии технологии пиролиза. В данной работе были проведены исследования по влиянию катализаторов на основе природных алюмосиликатов на пиролиз сосновых опилок. Было найдено, что катализатор Ni-Red Clay оказывает наибольшее влияние на процесс термодеструкции сосновых опилок, приводя к увеличению выхода жидких и газообразных продуктов пиролиза. Pyrolysis of lignocellulose feedstock into valuable products is a promising direction for processing waste from the woodworking industry and for obtaining energy carriers. The search for catalysts that provide the maximum yield and heat value of the products obtained is an urgent issue in the development of pyrolysis technology. In this paper, studies on the effect of catalysts based on natural aluminosilicates on the pyrolysis of pinewood sawdust were carried out. It was found that the Ni-Red Clay catalyst has the highest influence on the process of thermal degradation of pinewood sawdust, leading to an increase in the yield of liquid and gaseous pyrolysis products.
В данной работе рассмотрена возможность использования золошлаковых отходов, образующихся от сжигания угля на теплоэлектростанциях, в качестве компонента строительных смесей. Представлен способ выделения из золошлаков следующих компонентов: угольный, магнитный и алюмосиликатный концентраты. Алюмосиликатный концентрат использовался в процессе изготовления минеральных вяжущих композиций и премиксов. Полученные образцы минеральных вяжущих композиций на основе гипса исследовались методами термогравиметрии и дифференциальной сканирующей калориметрии. Добавление алюмосиликатного концентрата улучшает эксплуатационные характеристики материала. В готовой композиции снижается водопоглощение и содержание равновесной влаги, что связано с изменением пористости и структуры материала. This paper considers the possibility of using ash and slag waste generated from coal combustion at thermal power plants as a component of building mixtures. A method for separating the following components from ash and slag is presented: coal, magnetic and aluminosilicate concentrates. Aluminosilicate concentrate was used in the process of manufacturing mineral binders and premixes. The obtained samples of mineral binder compositions based on gypsum were studied by thermogravimetry and differential scanning calorimetry. The addition of an aluminosilicate concentrate improves the performance of the material. In the finished composition, water absorption and the content of equilibrium moisture are reduced, which is associated with a change in the porosity and structure of the material.
В статье представлены результаты экспериментальных исследований пиролиза костры льна, проведенного в различных температурных режимах. Изучено влияние способа организации процесса пиролиза на выход, состав и свойства газообразных, жидких и твердых продуктов. Подробно изучен состав газообразных и жидких продуктов пиролиза и выполнен их сравнительный анализ. Приведено подробное сравнение таких свойств твердых углеродных остатков пиролиза костры льна как зольность, элементный состав, распределение пор по размерам и площадь удельной поверхности. The article presents the results of experimental studies of the pyrolysis of flax shive, carried out in various temperature conditions. The influence of the method of organizing the pyrolysis process on the yield, composition and properties of gaseous, liquid and solid products has been studied. The composition of gaseous and liquid pyrolysis products has been studied in detail and their comparative analysis has been performed. A detailed comparison is given of the properties of solid carbon residues of flax pyrolysis such as ash content, elemental composition, pore size distribution and specific surface area.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.