No abstract

Tribological characteristics of ultrahigh molecular weight polyethylene (UHMWPE) based compositions with graphite and molybdenum disulfide are studied under conditions of dry friction, boundary lubrication, and abrasive wear. It is shown that, under dry sliding friction, the wear rate of UHMWPE-graph ite and UHMWPE-MoS 2 polymer compositions is halved as compared to that of pure UHMWP, while their mechanical characteristics change only slightly. Under the conditions of abrasive wear, the wear resistance of these composites increases by 1.3-1.5 times. Concentrations of the fillers, which are optimum for improving the wear resistance, are determined. The supramolecular structure and the topography of worn surfaces of the UHMWPE compositions with various concentrations of the fillers are examined. A comparative analysis of the wear resistance of the composites under conditions of dry friction and lubrication is carried out. Mecha nisms of the wear of the UHMWPE-graphite and UHMWPE-MoS 2 polymer compositions under condi tions of dry sliding friction and abrasive wear are discussed.

No abstract

The influence of modification by hydroxyapatite (HA) nano- and microparticles on tribotechnical properties of ultrahigh-molecular-weight polyethylene (UHMWPE) was investigated to develop polymer implants for endoprosthesis. It was shown that modification of UHMWPE by hydroxyapatite nanoparticles within range of 0.1–0.5 wt.% results in increase of wear resistance at dry sliding by 3 times. On the other hand adding of 20 wt.% of micron size HA gives rise to the same effect. The effect of increasing wear resistance is not substantially changed at surface treatment of the nano- and microcomposites by N+ion beams as compared with nonirradiated blends. Preliminary joint mechanical activation of UHMWPE powder and fillers results in more uniform distribution of nanofillers in the matrix and, as a result, formation of more ordered structure. Structure within bulk material and surface layers was studied by means of optical profilometry, scanning electron microscopy, infrared spectroscopy, and differential scanning calorimetry. It is shown that adding of hydroxyapatite nanoparticles and high-energy surface treatment of the composite by N+ion implantation improve tribotechnical properties of UHMWPE due to formation of chemical bonds in the composite (crosslinking) and ordering of permolecular structure.