В статье рассматривается роль генных мутаций томата в создании новых сортов и гибридов, пригодных для механизированной уборки урожая. Дана характеристика различных генов, связанных с морфологическими признаками растений томата, с типами плодовой (цветочной) кисти и плодоножки. Отмечены гены, контролирующие форму и размер плода, его устойчивость к растрескиванию и механическим воздействиям, показано значение этих генов для селекции машинных сортов и гибридов. В статье подчеркивается необходимость создания новых машинных сортов и гибридов томата с высоким качеством плодов, равномерно окрашенных, без зеленого пятна у основания, соответствующих основным требованиям перерабатывающей промышленности. Рисунками проиллюстрированы генные мутанты, представляющие наибольший интерес для селекции машинных сортов
Селекционная работа по выведению томата для механизированной уборки должна быть направлена на создание новых сортов и гибридов с морфологическими признаками, соответствующими ее требованиям: детерминантный тип куста с высокой дружностью созревания плодов, прочность кожицы плода, прочность и твердость зрелых плодов и их устойчивость к растрескиванию на растениях, отсутствие сочленения на плодоножке и пр. Как правило, таким требованиям отвечают сорта с овальной и удлиненной формой плодов с индексом 130-155. Кроме того, при уборке комбайном плоды должны отделяться от растения без плодоножек (ген j-2). Этот признак (jointless) – основной, определяющий пригодность сортов для механизированной уборки. Цель работы: создать сорта и линии томата, отвечающие требованиям механизированной уборки. Сорта и линии были созданы в соответствии с положениями рабочей программы ВНИИ овощеводства совместно с КубГАУ на территории Краснодарского края. Исследования проводили в специализированном хозяйстве «Солнечный». Проведена предварительная оценка сортообразцов по хозяйственно ценным признакам, таким, как прочность кожицы плода, твердость зрелых плодов, их устойчивость к растрескиванию на растениях и осыпанию до начала уборки, прочность прикрепления плода к плодоножке и т.д. Степень выраженности этих признаков определялась лабораторным путем с использованием специальных приборов, разработанных в НИИОХ (ныне ВНИИО–филиал ФНЦО). Приведены результаты оценки сортов на пригодность для механизированной уборки урожая с помощью комбайна FMC. Показана прямая связь этих результатов с данными полевых и лабораторных исследований морфологических признаков и физико-механических свойств зрелого плода, типов плодоножки и т.д. Breeding work on tomato breeding for mechanized harvesting should be aimed at new cultivars and hybrids with morphological characteristics that meet its requirements: the determinant type of plant with a high simultaneous fruit maturation, the strength of the fruit skin, the strength and hardness of mature fruits and their resistance to cracking on plants, the absence of joint on the pedicle etc. As a rule, such requirements are met by cultivars with an oval and elongated fruit shape with an index of 130–155. In addition, when harvesting with a combine harvester, the fruit must be separated from the plant without pedicels (gene j-2). This feature (jointless) is the main one that determines the suitability of cultivars for mechanized harvesting. Goal of the work: to breed tomato cultivars and lines that meet the requirements of mechanized harvesting. Cultivars and lines were bred in accordance with the provisions of the working program of All-Russian Research Institute of Vegetable Growing (ARRIVG) together with Kuban State Agrarian University in the Krasnodar territory. The research was carried out in a specialized farm “Solnechnyi”. A preliminary assessment of cultivars on economically valuable characteristics, such as the strength of the fruit skin, the hardness of mature fruits, their resistance to cracking on plants and shedding before harvesting, the strength of attachment of the fruit to the pedicle etc. The degree of severity of these signs was determined by laboratory methods using special devices developed at ARRIVG. The results of cultivars assessment for suitability for mechanized harvesting using the FMC combine are presented. The direct connection of these results with the data of field and laboratory studies of morphological features and physical and mechanical properties of mature fruit, types of peduncle etc. is shown.
Рассмотрены важные аспекты использования геноносителей различных маркерных признаков при создании и селекции гетерозисных гибридов томата для защищенного грунта. Наряду с общими требованиями к родительским компонентам, касающимися продуктивности растений, скороспелости, устойчивости к болезням и т. д., сегодня при селекции на гетерозис для защищенного грунта к исходному материалу предъявляют более высокие требования по наличию хозяйственно полезных признаков. Эти требования касаются типа роста растений, формы, окраски и качества плодов, типа кисти, формы плодоножки и т. д. Представлены характеристики исходного материала для создания гетерозисных гибридов томата, а также даны характеристики полученных гибридов. Исследования, проведенные в отделе селекции ВНИИО (ВНИИ овощеводства – филиал ФГБНУ ФНЦО), показали большую перспективность использования при гетерозисной селекции томата для защищенного грунта геноносителей различных маркерных признаков, особенно признаков, определяющих коричневую окраску эндосперма семян (гены bs и bs-2) и несочлененную плодоножку (ген j-2). Созданные с использованием этих маркерных признаков гибриды и селекционные линии по-своему уникальны и являются приоритетным достижением этого научного учреждения, так как они представляют большой интерес для гетерозисной селекции томата в качестве исходного материала. Целый ряд гибридов F1 включен в Госреестр селекционных достижений, допущенных к использованию (Удача, Голубчик, Клад овощевода, Заур и др.). В связи с развитием фермерского и любительского овощеводства в последние годы определенное внимание было уделено созданию новых мутантных линий с розовыми, малиновыми и темно-коричневыми плодами с высокими вкусовыми качествами (учитывая, что образцы такого типа пользуются повышенным спросом у населения и стоят дороже). При создании новых гетерозисных гибридов были учтены эти признаки родительских форм. Important aspects of the use of gene carriers of various marker traits in the creation and selection of heterotic tomato hybrids for greenhouse industry are considered. Along with the general requirements for the parent components concerning plant productivity, precocity, resistance to diseases, etc., today, when breeding for heterosis for greenhouse industry, higher requirements are imposed on the source material for the presence of economically useful features. These requirements relate to the type of plant growth, shape, colour and quality of fruits, brush type, stem shape, etc. The characteristics of the initial material for creating heterotic tomato hybrids are presented, as well as the characteristics of the resulting hybrids are given. Studies conducted in the breeding department of the ARRIVG (ARRIVG – a branch of the FSBI FSCV) showed great prospects for the use of gene carriers of various marker traits, especially those that determine the brown colour of the seed endosperm (bs and bs-2 genes) and an undifferentiated peduncle (j-2 gene) in the heterosis breeding of tomatoes for greenhouses. Hybrids and breeding lines created using these marker traits are unique in their own way and are a priority achievement of this scientific institution, since they are of great interest for the heterosis breeding of tomato as a basic material. A number of F1 hybrids are included in the State Register of Breeding Achievements allowed for use (Udacha, Golubchik, Klad ovoschevoda, Zaur, etc.). Due to the development of farming and amateur vegetable growing in recent years, some attention has been paid to the creation of new mutant lines with pink, crimson and dark brown fruits with high taste qualities (given that samples of this type are in high demand among the population and are more expensive). When creating new heterotic hybrids, these features of the parent forms were taken into account.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.