Natural-production conditions determine operational efficiency of logging machines. This influence needs to be taken into account at different levels of forest management. It is necessary to allocate areas with similar natural-production conditions for effective forest management. It allows simplifying the decision making process for selecting logging technology and machines. The purpose of this study was to establish areas with similar natural and production conditions in the European North of Russia (ENR). In addition, for small enterprises, we recommend logging technologies and logging machines that can be used in established areas. We determined the indicators of the natural-production conditions of ENR regions and compared them. Cluster analysis was used to compare the indicators. We found that ENR can be divided into three main zones A, B, C and two subzones B1 and B2 with similar natural-production conditions. In the zones A, B and the subzones B1 and B2, small logging enterprises should use a harvester and a forwarder. In the zone C, the enterprises can use a logging system including a harvester and a forwarder or a logging system including a feller buncher, a skidder and a processor. The logging system should be based on the light class of logging machines for the zone A, the medium class or the heavy class for the zones B, C and the subzones B1, B2, the heavy class of machines for the zone C.
АННОТАЦИЯПриводятся результаты исследования упругих свойств слоя лесосечных отходов, предназначенных для повышения несущей способности трелевочных волоков. Дано описание изменения модуля упруго-сти слоя лесосечных отходов при сжатии.Ключевые слова: лесосечные отходы, прочность, трелевочный волок. SUMMARYThe results of the study of elastic properties of the layer of logging residues for improving the carrying capacity skid trail.Keywords: logging residues, durability, skid trail. СОСТОЯНИЕ ПРОБЛЕМЫИспользование отходов лесозаготовок на лесосеке в первую очередь направлено на укрепление волоков, что отражается на направленности исследований и публикаций [2,3,5]. Актуальными являются и во-просы исследования экологического воздействия лесосечных отходов на трелевочные волока и лес как систему в целом [1,3]. Значительный ряд исследова-ний направлен на изучение действия движителя на лесной грунт [4]. Белорусскими исследователями проведен ряд измерений упругих свойств сучьев и ветвей в условиях, приблизительно соответствую-щих их использованию на волоках [6].На наш взгляд, для точной оценки комплексного влияния отходов лесозаготовок на параметры дви-жения лесозаготовительных машин, и как следствие, на экологическую обстановку, необходимо опреде-лить упругие свойства слоя лесосечных отходов, расположенных непосредственно на грунте.Ранее предпринимались попытки провести испыта-ния в лабораторных условиях. Отходы лесозаготовок укладывались на две опоры, в средней части прикла-дывалась нагрузка и фиксировалась стрела прогиба. В реальных условиях отходы лесозаготовок распола-гаются непосредственно на грунте и картина взаи-модействия нагрузки и слоя отходов лесозаготовок меняется.1 Авторы -соответственно доцент кафедры техно-логии и оборудования лесного комплекса и сотрудник отдела ИПРИПИ. © Галактионов О. Н., Безлатный П. В., 2010 Основное отличие, на наш взгляд, состоит в боль-шом количестве взаимодействующих элементов лесосечных отходов и, следовательно, более слож-ном характере их взаимодействия. МЕТОДИКА ПРОВЕДЕНИЯ ИЗМЕРЕНИЙИспытания проведены непосредственно на лесосеке. Для измерений использовались свежие и подсушен-ные лесосечные отходы, подсортировки по породам не проводилось. Подготовка грузов включает напол-нение гибких емкостей песком, их взвешивание, нумерацию. Масса грузов 20 кг.Лесосечные отходы формируют в кучу, фиксируют ее размеры -два перпендикулярных диаметра и вы-соту. Измерения проводят по методу «полного ящи-ка». Лесосечные отходы взвешивают, что позволяет уточнить коэффициент полнодревесности.По краям кучи устанавливаются стойки, на которых на определенной высоте (высота установки зависит от предполагаемой высоты объекта измерения) рас-полагается контрольная рейка, относительно кото-рой измеряется деформация кучи лесосечных отхо-дов. На вершину кучи лесосечных отходов устанав-ливается опорная площадка известной площади, на которую затем последовательно добавляют грузы. После добавления очередного груза фиксируют те-кущую высоту деформированной кучи лесосечных отходов. Грузы добавляют до тех пор, пока ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.