No abstract

Sensors used in rocket and space technology are subject to extreme external influences in terms of temperature, vibration, and shock. Therefore, the choice of the type of sensors is justified precisely by the resistance to such factors, as well as the ability to ensure the temporal and parametric stability of measurements. A new type of sensors – fiber-optic ones – meets these conditions. The basis for the selection and further improvement of such sensors were such requirements as minimum power consumption, high accuracy and stability of measurements, the ability to combine several measurements in one sensor. It is noted that for space infrastructure the factor of the possibility of simultaneous measurement of several parameters with one sensor is one of the important quality indicators. This is due to the possibility of reducing the number of sensors themselves, which reduces the mass and size parameters of space technology. This applies, first of all, to measurements of pressure and temperature, since they, in aggregate, account for at least 40 % of all measurements in space products. The path of choos-ing the types of methods and sensor designs led to the combination of the amplitude conversion method and optical communication in one sensor. In this case, amplitude modulation of pressure and temperature is carried out by a microelec-tromechanical unit (module), and the modulated optical signal is transmitted by an optical module. Such a modular composition of the sensor makes it possible to dispense with optical ana-lyzers (interrogators) and carry out further pro-cessing based on standard interfaces. A limitation of the proposed methods and designs is the need for microelectromechanical structures that measure certain physical quantities. Such structures for fiber-optic sensors are not mass-produced; therefore, their manufacture can be established at instrument-making enterprises with microelectronic equipment

In this research paper, the problem of studying the effectiveness of ozone in the process of water treatment was considered. In the course of the scientific work, a review of domestic and foreign literature was conducted; its advantages and disadvantages were considered. The research paper presented the theoretical and practical methods of water purification with ozone. The main factors influencing the efficiency of the technology in the process of water purification were also considered. It was established that as a technological method of water purification, the efficiency of the ozonation process includes not only the cost of electricity, but also the efficiency of its mixing, ozone dissolution in treated water. In addition, special attention is paid to the final stage of mixing the ozone-air mixture with treated water. From the results obtained, it can be seen that after primary ozonation, the concentrations of chromium, oxidation of permanganate, iron, petroleum products, metal ions and other pollutants significantly decreased. During further water purification, organic and inorganic pollutants are removed in the future (completely or up to the requirements of the standard). However, calcium, magnesium, sulfates, chlorides, pH value, alkalinity and hardness practically do not change. The water quality after primary ozonation according to bacteriological indicators met the requirements of the standard.

The pulsed elongation of fiber Bragg gratings is considered in order to be used to measure the displacement or deformation rate of objects. Optimal measurement modes were determined, numerical simulation of the output signal was performed during pulsed elongation or compression of the fiber grating, and the main patterns were analyzed. The results of the application of the Bragg gratings for the experimental determination of the deformation rate of materials under pulsed magnetic action are presented. Experimentally obtained and theoretical dependencies are compared. The dependencies of the change in the grating parameters—the coefficient and the half-width of the reflection spectrum with successive shortening of the grating—are given.

The objects of research are the designs and manufacturing technologies of a combined fiber-optic sensor. It is used in extreme operating conditions. The essence of the task is to study the constructive and technological compatibility of optical and micromechanical principles of simultaneous measurement of several heterogeneous physical quantities. In this regard, the chosen modular conversion principle solves the problem of combined conversion. The developed design and technology of the electro-adhesive connection make it possible to significantly reduce the internal mechanical stresses in the sensor and thereby increase the stability of the combined sensors in extreme operating conditions. Analytical models linking the magnitude and orientation of internal mechanical stresses with the characteristics of temporary stability for complex structures, as a rule, are absent. In practice, the obtained research results can be applied to combined pressure and temperature sensors, pressure and vibration, etc.

No abstract

In this research paper, we presented a novel approach to detect impulsive sounds in real-time using a combination of Deep CNN and RNN architectures. The proposed approach was evaluated using our collected dataset of impulsive sounds, and the results showed that it outperformed traditional audio signal processing methods in terms of accuracy and F1score. The proposed approach has several advantages over traditional methods, including the ability to handle complex audio patterns, detect impulsive sounds in real-time, and improve its performance with a large dataset of labeled impulsive sounds. However, there are some limitations to the proposed approach, including the requirement for a large amount of labeled data to train effectively, environmental factors that may impact the accuracy of the detection, and high computational requirements. Overall, the proposed approach demonstrates the effectiveness of using a combination of Deep CNN and RNN architectures for impulsive sound detection, with potential applications in various fields such as public safety, industrial settings, and home security systems. The proposed approach is a significant step towards developing automated systems for detecting dangerous events and improving public safety.

This paper presents a time-saving method for monitoring the ecology of a dispersed territory using the delivery of measurement units provided by unmanned aerial vehicles with measurement sensors according to a reverse priority algorithm. It is achievable because of the decreasing mean waiting time of the order inside a queue during low-priority order servicing. The experimental research that confirms the efficiency of the proposed method in the case of delivery distributed measurement systems for low-priority measurement is carried out. The experimental research of the proposed method in the case of one-channel and many-channel SMD that can have an option of order rejection or an in-queue waiting option is conducted in WeBots. The probability distributions in the case of this system applying are compared with similar probability distributions in the case of systems of direct priority applying. Comparison and analysis enable us to conclude that the probability distribution in the case of SMD with a direct priority of delivery tends to decrease and approximates zero. This is related to the fact that means at the end of the queue to be handled have a lower priority, as these means of measurement take longer to handle the order than those at the head of the queue. Thus, the means of a low priority will be serviced in the last charge and there is a constant possibility that in some cases such orders will be rejected. The proposed method enables moderate this situation by using increasing the possibility of servicing the low-priority orders. The method can increase the efficiency of environmental monitoring and pollution emission control.